Using Your TV and Remote
With Remote Buttons
1. Power Buttons
OFF
Turns off the "IV.
Turns off compatible VCRs.
ON/OFF
Turns on a component after a component button is pressed.
Turns off components except audio equipment.
2. TV Buttons
CLEAR
Clears menus and displays from the screen.
DISPLAY
Shows displays on the screen,
Clears menus from the screen.
SKIP:30 (Commercial Skip) Allows you to scan other channels during commericals.
Each press adds 30 seconds. TV switches back to original channel when time runs out. Press CLEAR to cancel SKIP.
VOL (Volume)
Raises and lowers sound.
Moves left and right on a menu line. See Quick Guide to the Menus
on page 5.
Changes a feature setting.
MUTE
Turns off the TV sound.
3. Number Buttons (0-9)
Selects any channel number.
Two numbers must be pressed for each channel. Press 0 and 6 for
channel 6.
TV
Turns on the TV.
Shows the displays on the screen. Sets the remote to control the TV.
See Using the Remote with a VCR,
Cable Box, Laserdisc Player and Audio
equipment on pages
CHAN (Channel)
Scans up and down through channels in the TV's memorv.
Moves up and down menus. See Quick Guide to the Menus on page 5.
Moves through channels in VCR°s memory.
PREV CHAN (Previous Channel)
Changes back and forth between two channels.
Select a channel and then select another. Press PREV CHAN to switch between the two channels.
MENU
Shows menus on the screen and moves from menu to menu.
RESET
Returns the picture adjustments to the original settings.
DONE
Saves the setup of a feature and removes the menu from the screen.
For three digit channels, press and hold 1 until
