Sears 437.83235 owner manual Electrical HOOK-UP, Operation

AIRINTAKEGRILLE- Dirtyairisdrawnin360°intothe KenmoreHEPAAirGleaner,

AIROUTLET- AftertheairhasbeencleanedbytheHEPA filter,it isdispersedPWARDSintothesurrounding atmosphere.

CARRYINGHANDLE- A convenienthandleisprovidedto enableeasyrelocatiilnofyouraircleaner.

FILTERCHANGED&TECALENDARS- Twofilterchange datewheelsarepro'_idedasaconvenientreminderwhen

to replacethepre-fil'andtheHEPAfilterer.

SET-UP

Visually inspect the NEPA air cleaner upon removing the

I

unit from its box. Remove and discard any packaging material. Return the un t if it shows any signs of damage or mishandling. This urltt was thoroughly inspected and tested at the factory prior t_ packaging.

i

Upon start up of YOUrKenmore HEPA Air Cleaner, set the Pre-filter Change DcIe Calendar ahead 3 months and the HEPA Change Date _alendar ahead 2 years to indicate when the next fi ter _p acement is necessary.

i

CAUTION; DO NOTp ace the a r c eaner within 3 feet of

any computer or anyl magnetically sensitive devices such as floppy disks or tapes.

ELECTRICAL HOOK-UP

Plug the air cleaner into a polarized 120 Volt AC wall outlet.

WARNING

To avoid fire or shock hazard, the HEPA air cleaner should only be plugged intqia polarized 120 Volt AC outlet. NEVER operate the _EPA air cleaning system without the

HEPA filter propedy !i#stalled. Permanent motor damage could result.

OPERATION

Each time the air cleaner is operated, turn the control switch to the III (super) position for a fast initial cleaning for a few seconds. Theei adjust the control switch to the desired output setting:

III (super) - Maximur_ operation - fast initial cleaning

II(high) - Daytime o_eration - fast fan speed I (low) - Night-time -quieter operation Turn iONIZER switc_ ON.