Sears 437.83235 owner manual PowerHead, Replacing THE, Harcoal PRE-FILTER

PowerHead

Fastener HEPAFilter

/

Locking

/ _ Mechanism

._harcoalPre-filter

Base

REPLACING THE, ;HARCOAL PRE-FILTER

(Model #83155)

Step 4

Remove the filter assJ_mbly(consisting of the HEPA filter and pre-filter) from tl_ power head.

Step 5

Remove the strap fasflener and carefully remove the pre-filter and discard.

Step 6

Remove any plastic _rotective wrapping from the new pre- filter prior to insertioi) into the HEPA air cleaner. Carefully wrap the new pre4ilt_r around the HEPA filter and secure into place with the s_rap fastener, Proceed to step #!0.

CHANGING THE I_EPA FILTER (Model #83154)

Step 7

Follow instructions t_l_'oughStep 6. Remove used HEPAfilter assembly and discaHd the filter.

Step 8

Remove any protectt_/eplastic wrapping and packaging from the New HEPA filter

Step 9

H

Replace the pre-filt_r by wrapping it around the HEPA filter and use the st[_apfastener to secure the pre-filter in place. Please be suJlethat the pre-filter has been properly installed and is layiltg flat around the HEPA filter.

Step 10

Place the filter ass_nbly into the power head and instali the base,

Note: The HEPA fil_er assembly was designed to easily fit

into the power hea_ without any orientation: there is no top or bottom to th_ HEPA filter,