Maintenance
Checking the Blades
WARNING:
Protect your hands with gloves when working with the blades. Risk of cutting.
It is important that the blades are undamaged and
IMPORTANT INFORMATION:
Replacement or sharpening of the blades should be carried out by an authorised service representative.
The blades should be balanced after sharpening.
Damaged blades should be replaced when hitting obstacles that result in a breakdown. Let the servicing dealer judge whether the blade can be repaired/ ground or must be discarded.
WARNING:
If the blades are cracked, whether caused by poor repair or other damage, they could break while being used. Cracked and defective blades must always be replaced. The risk increases if the blades are poorly balanced.
Replacing the power take-off belts
Always replace the belts in pairs.
1.Remove the driver's seat.
2.Remove the protective cover above the hydraulic pump's drive shaft.
3.Remove the ignition keys from the machine.
4.Release (1) the drive shaft from the hydraulic pump and remove the spacer ring (2) from the coupling.
Sharpening blades
Balancing blades
2
1 
Drive shaft spacer ring
50
