Driving
•Connect the other end of the BLACK lead to a good CHASSIS EARTH, away from the fuel tank and battery.
Remove the leads in reverse order:
•The BLACK cable is removed from the chassis and then the fully charged battery.
•Finally the RED cable from both batteries.
Driving the machine
1. Release the parking brake by pulling the handle up.
Parking brake
2.Select high or low speed with the switch on the control panel.
Speed selector
3. Carefully press down one of the pedals until the required speed is attained.
Pedal (1) is pressed down to travel forwards and pedal (2) to reverse.
Driving pedals
4.Lower the cutting unit to the ground using the lifting lever. Move the lifting lever forwards.
Lifting lever lowering position
33
