Maintenance
4.Check that the pedal can be locked in the applied position with normal pedal force.
5.Adjust as necessary using the wires' adjuster screws (R and L).
Servicing the air filter
If the engine seems to lack power or does not run smoothly this may be because the air filter is clogged. When driving with a dirty air filter, the engine does not receive enough air, which does not meet the environmental demands, and the engine does not operate at full efficiency.
It is important to replace the air filter regularly (see See “Maintenance Schedule” on page 35 for the proper service interval).
Emptying the particle trap
Compress so that the rubber tabs open and any
particles can drop out.
Particle trap on air filter
Cleaning the cyclone filter
Remove the cover held in position by two brace locks and clean the inside of the cover. Wash with soap water and blow dry using compressed air after removing the cover.
IMPORTANT INFORMATION:
It is important that the particle trap is turned straight down when installing the cover.
Cyclone filter
Replacing the air filter
Remove the cover held by two brace locks. Pull the air filter cartridge straight out and remove it.
Wipe the inside of the air filter housing dry. If necessary, dampen the cloth with white spirit or fuel. Water or compressed air must not be used.
Install a new air filter cartridge with the hole inwards and press into position. It is important that the particle trap is turned straight down when installing the cover.
IMPORTANT INFORMATION:
Air filter cartridge
Do not use compressed air to clean the paper filter. Do not wash the paper filter.
Do not oil the paper filter.
40
