Manuals / Husqvarna / Lawn and Garden / Lawn Mower

Husqvarna PT26 D manual Accessories, Towing, Presentation

Models: PT26 D

1 80

Download 80 pages 52.58 Kb

Page 29

laterally to the side in relation to the machine.

Presentation

laterally to the side in relation to the machine.

If necessary, the cutting unit can be turned to the service position to be able to clean the underneath of the cover for example.

Accessories

The accessories are described in separate operator’s manuals. Contact your dealer if you require an accessory.

Examples of original accessories available for

Husqvarna PT 26D:

• Trafﬁc kit: Lighting with direction indicators, parking

	light and rotating warning lamp
• Accessory hydraulic kit; Hydraulic valves, quick		Service position
• Accessory hydraulic kit; Hydraulic valves, quick
	couplings,hydraulic hoses, switch and cable
	harness
•	Brush
•	V blade
•	ROPS
• Bucket with hydraulic emptying
•	Catalytic converter.

Towing

Towing must be avoided. Only damaged machines that cannot be driven may be towed in the event of being recovered or loaded onto vehicles.

The bypass valve must be loosened by 2-4 turns when towing. Lift the driver’s seat and unscrew the bypass valve. Remember to retighten the valve.

Unscrew the bypass valve when towing

28

Image 29

Husqvarna PT26 D manual Accessories, Towing, Presentation, laterally to the side in relation to the machine

Contents

English PT26 DOperator′s manual Contents Page Congratulations Chapter 1 IntroductionDriving and Transport on Public Roads TowingIntroduction Proper ServiceSerial Number Symbols and Decals Chapter 2 Symbols and DecalsXxx xxx xxxx xxxxxxxxx xxx xxxxx xxx xxxx IMPORTANT INFORMATIONxxxxx xx xxxxx. Xxx xxxxxxxx xx x x xxxxxxx xx xxxx Symbols and DecalsGeneral Use Chapter 3 Safety InstructionsSafety Instructions foreign objects Never drive close to objects or other machines Safety InstructionsSafety Instructions Driving on slopesDo as follows Safety Instructions MaintenanceChildren Avoid sparking and its consequences by actions in the engine roomSafety Instructions IMPORTANT INFORMATIONﬂammable liquids are stored in an open container Safety InstructionsEnvironment protection TransportSafety Instructions IMPORTANT INFORMATIONSafety Instructions User responsibilityPresentation Chapter 4 PresentationSwitch for weight transfer page Placement of controlsSwitch for operating the cutting unit page Switch for 2nd hydraulic function option page3. Parking brake 1-2. Speed controlWarning lamp Battery charging page Warning lamp Right-hand indicator page4. Control panel Do not adjust the seat whilst driving. Risk of unsafe operation5-9. Seat Presentation10. Steering wheel and steering wheel console 12. Adjusting the cutting height11. Differential Lock 13. Fuelling21. Control lever hydraulics 21-37. Controls on the control panelWinter fuel and parafﬁn precipitation Lifting the cutting unit transport position23. Switch for extra hydraulic function hydraulic kit option 22. Switch for operation of cutting unit25. Indicators trafﬁc kit option 24. Push button for horn trafﬁc kit option27. Headlight 26. Starter switch28. Throttle control 29. High speed33. Spare 34-35.Power outlet 30. Weight transfer31. Rotating warning light trafﬁc kit option 32. Parking lights trafﬁc kit option36. Chronometer Adjusting the steering wheel setting40-51. Warning lamps 49. Lever for steering wheel console angleThe bow is foldable. Pull out the pins and fold the bow backwards RopsIf the bow is used unfolded, safety belt must be used If the bow is used folded, safety belt should NOT be usedPresentation Cooling systemIMPORTANT INFORMATION Antifreeze Cutting unitIMPORTANT INFORMATION IMPORTANT INFORMATIONTowing AccessoriesPresentation laterally to the side in relation to the machineMowing Tips Chapter 5 DrivingDriving Use ear protectionStart gas or ether must not be used for this engine Before StartingIMPORTANT INFORMATION IMPORTANT INFORMATIONDo not run the starter motor for more than Starting the engineIMPORTANT INFORMATION DrivingStarting in cold conditions Starting with a weak batteryIMPORTANT INFORMATION DrivingDriving Driving the machineCutting the engine BrakingBleeding in the event of fuel stoppage Engine stopMaintenance Schedule Chapter 6 MaintenanceMaintenance 10002000 Maintenance1000 Avoid using a high pressure washer or a steam cleaner CleaningLubricate the machine if necessary after cleaning The engine is stopped The parking brake is onAdjusting the pump and generator drive belts Cleaning the radiators heat exchanger1. Slacken off the adjustment screw 1/2 turn Removing the machine’s coversAdjusting the parking brake Checking and adjusting the throttle controlA poorly adjusted parking brake can result in reduced braking ability Replacing the pump and generator drive beltsServicing the air ﬁlter Cleaning the cyclone ﬁlterReplacing the air ﬁlter Emptying the particle trapServicing the fuel ﬁlter Bleeding the fuel systemChecking the Tyre Pressures MaintenanceWhat to do in case of contact with battery acid Servicing the batteryFuses External Rinse thoroughly with waterChecking the Safety System IMPORTANT INFORMATION Replacing the bulb in the headlightMaintenance The Cutting Unit Components Light settingAttaching and removing the cutting unit Side shifting the cutting unitIMPORTANT INFORMATION Maintenance4. Stop the engine 5. Remove the pins on both sides Cutting height Setting the cutting height and tilt angleMaintenance IMPORTANT INFORMATIONPlacing in the Service Position The Cutting Unit’s Service PositionTilt angle Ground pressureMaintenance Releasing the Service PositionCutting Unit Model Checking the Blades Replacing the power take-off beltsAlways replace the belts in pairs MaintenanceReplacing the cutting unit belt Adjusting the power take-off beltsReplacing the belt on the Combi unit MaintenanceMaintenance Removal of BioClip PlugLubrication Schedule Chapter 7 LubricationGeneral Lubricating the cablesLubricating in Accordance with the 2. Handle for cutting height setting1. Pivot wheel bearings 3. Cutting unit’s bevel gear5. Lift cylinder 6. The power take-off shaft’s front support bearing7. Engine Oil Viscosity and qualityChanging the Engine Oil Filling engine oilAvoid skin contact wash with soap and water in case of spills 1. Position the wheels fully to the left8. Hydraulic oil 7. Replacing the engine’s oil ﬁlterInspection off the oil level Filling hydraulic oil9. Cutting unit mounting 8. Hydraulic oil ﬁlter, change10. Lifting arm’s rear bearings 11. Driver’s SeatLubrication 12. Parking brake cables13. Control cylinder Lubrication Trouble Shooting Guide Chapter 8 Trouble Shooting GuideProblem CauseCause Trouble Shooting GuideProblem Problem Trouble Shooting GuideCause Uneven mowing resultsTrouble Shooting Guide Storage Chapter 9 StorageWinter Storage Storage ServiceElectrical system, component locations Chapter 10 Electrical systemElectrical system Hydraulic System Chapter 11 Hydraulic SystemHydraulic System Keep the hydraulic system clean. Remember toFuel system Chapter 12 Fuel systemTechnical Data Technical DataData PT 26DPT 26D Technical DataData IMPORTANT INFORMATION Technical DataIMPORTANT INFORMATION DataTechnical Data Design standards Design standardsEU Declaration of Conformity only applies to Europe Diverse design standardsDesign standards Page Page Original instructions 1153893-26 ´z+Uy@¶6u¨ ´z+Uy@¶6u¨