Technical Data
Data | PT 26D |
|
|
|
|
Noise emissions with unit C155 |
|
|
|
Measured noise level2 | 103 dB(A) |
Guaranteed noise level2 | 104 dB(A) |
Sound pressure level at the operators ear3, dB(A) | 90 |
Noise emissions with unit C132 |
|
|
|
Measured noise level2 | 102 dB(A) |
Guaranteed noise leve2l | 102 dB(A) |
Sound pressure level at the operators ear3, dB(A) | 88 |
Vibration levels4 |
|
Vibration level on the steering wheel, m/s2 | 1,4 |
Vibration level in the seat, m/s2 | 0,7 |
Note 1: The power rating of the engine indicated is the average net output (at specified rpm) of a typical production engine for the engine model measured to SAE standard J1349/ISO1585. Mass production engines may differ from this value. Actual power output for the engine installed on the final machine will depend on the operating speed, environmental conditions and other values.
Note 2: Noise emissions in the environment measured as sound power (LWA) in conformity with EC directive 2000/14/EC. If the machine can be equipped with different cutting decks, the noise emissions are stated in order starting from the cutting deck with the smallest cutting width.
Note 3: Noise pressure level according to EN 836. Reported data for noise pressure level has a typical statistical dispersion (standard deviation) of 1.2 dB(A). If the machine can be equipped with different cutting decks, the noise pressure levels are stated in order starting from the cutting deck with the smallest cutting width.
Note 4: Vibration level according to EN 836. Reported data for vibration level has a typical statistical dispersion (standard deviation) of 0.2 m/s2 (steering wheel) and
0.8 m/s2 (seat).
IMPORTANT INFORMATION:
When this product is spent and is no longer used it should be returned to the dealer or other authority for recycling.
IMPORTANT INFORMATION:
In order to introduce improvements the specification and design are subject to alteration without prior notice.
Note that no legal demands whatsoever can be made with the support of the information in this operator’s manual.
Only use original spare parts with repairs. The use of other parts invalidates the warranty.
73
