Husqvarna PT26 D manual 250 500 1000 2000

Maintenance

● = Described in this manual

❍ = Not described in this manual.

Maintenance	Page	Daily main-	Weekly	Maintenance interval hours
		tenance	main-	250	500	1000	2000 3000
		befor after	tenance
Check the condition of the battery,	42			●
clean if necessary
Check the oil level in the bevel gear,	112			●
top up if necessary
Check the wheel nuts	-			❍
Check the parking brake, adjust if	39			●
necessary5
Check the safety function	43			●
Check/adjust the cutting unit settings.	47			●
(tilt angle)5
Replace the air filter and clean the	40				●
cyclone filter
Replace the belts (power take-off belt	-				●
and cutting unit belt)
Adjust the power take-off belts5
Check the condition of the hydraulic	-				❍
hoses5
Replace fuel filter and check hoses4	-				❍
Adjust the valves and check the	-					❍
engine speed4
Replace the pump and generator belt	39					●
Change the hydraulic oil and filter4	-					❍
Change the oil in the bevel gear	112				●
Change the coolant4	50					●
Check all hoses with connections to	-						❍
the engine and the engine’s
mountings5
Replace the diaphragm for the closed	-						❍
crankcase ventilation4
Check cables and terminals in the	-							❍
electrical system4
Check generator and starter motor4	-							❍
Pressure test the fuel injection	-							❍
nozzles4
Check the coolant pump4	-							❍

1.First change after 25 hours. When operating with a heavy load or at high ambient temperatures, replace the engine oil every 125 hours.

36