Technical Specifications
Audio
Line input sensitivity (set to Reference) 2V rms
Input impedance 10k ohm
Preamp output level (nominal) 2V rms
Output impedance 25 ohm
Signal/noise ratio (unwtd 20Hz –20kHz)– analogue >100dB
Signal/noise ratio (unwtd 20Hz –20kHz)– digital (24-bit) >98dB
THD+N – analogue 0.0012%
THD+N – digital (24-bit) 0.0015%
Headphone maximum output level into 600 ohm 5V p-p
Output impedance 5 ohm
Video inputs and outputs
Input and output impedance 75 ohm
Composite video level 1V
HF response to (–3dB) 12MHz
S-video level (Y/C) 1V/0.28V
HF response to (–3dB) 12MHz
HQ (component) video
level (Y/Cr/Cb) 1V/0.5V/0.5V
level (R/G/B) 1V/1V/1V
HF response to (–3dB) 300MHz
Digital inputs
Coaxial connection (level/impedance) 0.5V/75 ohm
Acceptable sampling frequencies, all inputs 44.1kHz, 48kHz,
(96kHz stereo only)
Digital output
Output level/impedance 0.5V/75 ohm
Sampling frequency in ADC output mode 44.1kHz
Trigger outputs
Output D.C. voltage (excl. RGB status) 12V ±1V
Allowable load 30mA max (min 400 ohm)
Remote inputs and output
Signal modulated 36kHz carrier
Coding Philips RC-5
General
Mains voltage range 85V to 265V
Power consumption 35VA
Power consumption (standby) 32VA
Dimensions Width x Depth x Height (including feet) 433mm x 360mm x 130mm
Weight (net) 9kg
Weight (packed) 14kg
Supplied accessories Mains lead
CR80 remote control
2 x AAA batteries