AV8 Engineering Mode

To access the software versions simultaneously press OK, DVD & CD on the front panel.

The software versions will be displayed on the OSD.

AV8 Version: 2.0

 

THX Ul2: 13.0

DTS –ES: 15.0

Dolby D: 16.0

DTSNeo6: 18.0

Plogic 2 : 4.0

Cos Eff : 15.0

Exit this menu

Select EXIT and OK to leave the menu.

If no buttons have been pressed for 30 seconds the AV8 will automatically exit the menu.

Press THX, this takes you to the engineering menu first page.

Use the up/down buttons on the front panel to select the option followed by the volume control to adjust the setting.

Engineering Menu

 

 

RC5 Code Zone 1 :

16*

(or 19)

RC5 Code Zone 2 :

16*

(or 19)

Scrolling Message:

Off

(or On)

Restore Defaults:

No

(or Yes)

Diagnostics :

Off

(or On)

Front Panel IR Rx :

On

(or Off)

EXIT

 

 

 

 

 

RC5 Code Zone 1

This allows you to select which RC5 system code zone 1 responds to (16 or 19). If set to code 19 the AV8 will not respond to the CR80 remote control.

RC5 Code Zone 2

This allows you to select which RC5 system code zone 2 responds to (16 or 19).

Scrolling Message

This allows you to turn the display scrolling message on/off. When the messages are turned on you can select the displayed message by pressing the corresponding input button.

Button

Message

DVD

Arcam AV8 FMJ Home Theatre

SAT

AV8 Multichannel Processor

AV

arcam sideways

VCR

Arcam AV8 Sound and Vision

AUX

AV8 Designed in Cambridge UK

CD

Arcam AV8 Preamp Processor

TUNER

AV8 THX ULTRA 2, DTS ES, DOLBY PL2

Restore Defaults

This allows you to reset the AV8 to the factory default settings.

Diagnostics (For factory diagnostics only)

This switches on RS232 messaging to allow remote analysis (hyperterminal at 38400 baud, 8 data bits, no parity, 1 stop bit and no flow control).

Please note that this will disable the RS232 interface for user control via crestron or similar controllers.

Front Panel IR Rx

This allows you to disable the front panel IR receiver and prevent the AV8 from responding to these signals.

With the Engineering Menu title bar highlighted use the volume control to select the second engineering page.

Engineering Menu 2

 

 

PLL Module

DVD :

AUTO

(or OFF)

SAT :

AUTO

(or OFF)

AV :

AUTO

(or OFF)

VCR :

AUTO

(or OFF)

AUX :

AUTO

(or OFF)

CD :

AUTO

(or OFF)

TUNER :AUTO

(or OFF)

TAPE : AUTO

(or OFF)

EXIT

If the source equipment clock rates are operating outside the specification of the AV8 phase locked loop circuit you may experience “a hissing noise” from the audio outputs. In this situation it is advisable to switch the phase locked loop circuit off of the input giving the problem. Using the second page of the engineering menu select the input and turn the PLL (phase locked loop) from AUTO to Off.

This can happen with Broadcast signals particularly from satellite, cable or terrestrial digital TV.

Page 9
Image 9
Arcam service manual AV8 Engineering Mode

AV8 specifications

The Arcam AV8 is a high-performance audio-video receiver that has garnered attention for its exceptional sound quality and versatile features, making it a sought-after option for both audiophiles and home theater enthusiasts. Designed to provide an immersive viewing experience, the AV8 is equipped with a range of technologies that enhance its performance.

One of the standout features of the Arcam AV8 is its support for high-definition audio formats. The receiver can decode various lossless audio formats, including Dolby TrueHD and DTS-HD Master Audio, allowing users to experience studio-quality sound. This capability is complemented by its advanced digital signal processing, which ensures that the audio output is clear and dynamic, enhancing the overall entertainment experience.

The AV8 is built with an emphasis on connectivity and flexibility. It boasts multiple HDMI inputs and outputs, facilitating seamless connections to a variety of devices such as Blu-ray players, gaming consoles, and streaming devices. With support for 4K video pass-through, the AV8 is future-proofed for high-definition content, ensuring compatibility with the latest video technologies.

Another notable aspect of the Arcam AV8 is its user-friendly interface. The receiver is equipped with an intuitive on-screen display that simplifies navigation and setup. Additionally, Arcam has incorporated room calibration technology, which analyzes the acoustic properties of the listening environment and adjusts the audio output accordingly. This feature allows for optimal sound reproduction, tailored to the specific characteristics of the room.

The build quality of the AV8 is exceptional; it features a robust chassis designed to minimize vibration and interference, ensuring high-fidelity sound reproduction. The receiver is designed for ease of use, with remote control functionality and smart home integration options, making it convenient to operate alongside other devices.

In summary, the Arcam AV8 is a powerful AV receiver that combines high-definition audio capabilities, extensive connectivity options, and user-friendly features. With its strong emphasis on sound quality and innovative technologies, it stands out in the competitive landscape of home theater equipment, catering to the discerning tastes of audio enthusiasts and casual users alike. Whether for music or movie playback, the AV8 offers a compelling solution for those seeking an elevated audio-visual experience.