REMOVABLE KNOBS
All control knobs may be removed for easy cleaning by pulling the knob straight off the stem. Be sum that the knob Is In the OFF position before removal.
Hint: Slip a thin cloth (such as a handkerchief) or a piece of string under and around the knob edge and pull up.
Caution: Read these InstrucUons
carefully before replacing the knobs. Replacing the knobs improp- erly will damage the knobs and the spring clip on the stems. If this happens, the knobs will fit loosely.
To replace the knob:
1.The knob stem has a groove In each side. The groove on one side has a spring clip. The other groove Is clear (see Illustration).
2.Check the Inside ofthe knob and find the molded rlb.
3.Replace the knob by fitting the molded rib Inside the knob Into the clear groove on the stem.
MOLDED
RIB
CLEAR GROOVE
IN STEM
Note: Be sure to replace knobs on correct
stem from which they came.
REMOVABLE COOKTOP UNITS
The cooktop elements can be unplugged and the bowls removed for cleaning.
Be sure all cnoktop unit control knobs are turned off and elements are cool before you remove or
replace a conktop unit.
To remove:
1.Grasp element, tilt it upward slightly to clear the bowl, then pull away from the receptacle. The element will not sit level when replaced If It Is forced too far upward when removed.
2.For models with porcelain enameled drip bowls, remove the chrome trim ring.
3.Lift out the bowl.
Do not put the element into water. It cleans Itself when heated during normal use.
To replace:
1.Replace the bowl. Be sure the receptacle Is showing Jnthe bowl opening.
2.For models with porcelain enameled drip bowls, replace chrome trim ring.
3.Slide the plug of the element flrmlylnto the receptacle and lower the element Into place.
IMPORTANT: Never operate a cooktep element
without the bowl in place. This can cause
scorching of the cnoktop, burning of wiring insulation and loss of energy.
ELEMENTS_PTACLE
CAUTION: DO NOT lift the
Repeated lifUng of the
12 |
