18.Raise hood and remove 3/8" carriage bolt and nut from right hand side of frame. See figure 18.

LIFT

LEVER

. PLUNGER

REMOVE FRONT

CARRIAGE BOLT

AND NUT

RIGHT SIDE VIEW

FIGURE 18

!9. Assemble support bracket onto right hand side of tractor frame (where carriage bolt was removed in step 15) using 3/8" x 1"" carriage bolt inside of frame and secure with 3/8" lock washer and 3/8" hex nut, on outside of frame.

See figure 19.

ATTACHMENTLIFT LEVER FRONT---_

23.Secure one end of blade lock release cable to small hole in blade lock release lever using one

3/8" x 3/4" clevis pin and one 3/32" hairpin cotter• See figure 20.

BLADE LOCK 1-1/2" O D WASHER

RELEASE LEVER

3/8" x 1"

HEX BOLT

D

CLEVIS PIN

COTTER PIN

SPACER FLAT WASHER

3/8" HEX LOCK NUT

FIGURE 20

24. Thread cable toward front of tractor under steering tie rod and front axle and above guide

LIFT LEVER

PLUNGER

BLADE PIVOT

bracket assembly• See figure 21.

1/4" HEX LOCK ROD

25.Assemble one 3/8" x 1-1/2" carriage bolt into top hole in angle lock bars and tighten secure- ly with one 3/8" hex lock nut. Place free end of cable over threaded end of carriage bolt and retain loosely with 3/8" hex lock nut. See figure 21.

3/8"'x

1"

 

CARRIAGE

EYE BOLT

BOLT

HAIRPIN

3/8"

LOCK

COTTER

WASHER

3/8" HEX NUT

 

 

RIGHT SIDE VIEW

FIGURE

19

 

20.Assemble the 1/4" eye bolt at the top of the support bracket and secure with one 1/4'" hex

. lock nut. See figure 19.

21.Assemble blade pivot rod through 1/4" eye bolt as shown in figure 19. Secure lower end of blade pivot rod through hole on right hand side of blade assembly with small hairpin cotter. See figure 19.

22.Assemble blade lock release lever to right side of tractor frame using one 1-1/2" OD washer, one 3/8" x 1" hex bolt, spacer, 3/8" flat washer and secure tightly with one 3/8" hex lock nut. See figure 20.

RIGHT SIDE VIEW

FRONT

.

SUPPORT BRACKET

3/8"" x 1-1/2"' CARRIAGE BOLT

NUTS (2)

il

STEERING

TIE ROD

FREE END

CHANNELOF CABLE

ASS'Y.

GUIDE BRACKET

ASS'Y.

FIGURE 21

Q

Page 8
Image 8
Sears 486.244062 owner manual Remove Front Carriage Bolt NUT Right Side View, Attachmentlift Lever Front, HEX Lock ROD

486.244062 specifications

The Sears 486.244062 is a notable entry in the realm of consumer electronics, specifically in the category of personal computers. Launched during a time when PCs were becoming increasingly integral to both home and business environments, this model featured a blend of cutting-edge technologies and user-friendly characteristics that appealed to a wide range of customers.

At the heart of the Sears 486.244062 was its Intel 80486 microprocessor, which represented significant advancement over its predecessors. Operating at a speed of 33 MHz, this processor provided enhanced performance for multitasking capabilities, enabling users to run various applications simultaneously without significant lag. This was particularly valuable during the early 1990s when software applications began to demand more processing power.

The computer typically came equipped with 8 MB of RAM, expandable up to 32 MB, accommodating the increasing demands of modern operating systems and applications of the time. This validated the 486's suitability for both business and home use, ranging from simple document editing to more detailed graphic design tasks.

In terms of storage, the Sears 486.244062 incorporated a 520 MB hard drive, which was ample for the period. It allowed users to store numerous files, applications, and multimedia content, marking a departure from the limited storage capacities of earlier models. The inclusion of a 3.5-inch floppy disk drive further enhanced its functionality, offering a convenient medium for data transfer and backups.

The system also featured a VGA-compatible graphics card, which enabled it to deliver clear and vibrant visuals, enhancing the user experience, particularly in gaming and graphic applications. Coupled with high-fidelity sound capabilities, the Sears 486.244062 catered to an audience interested in multimedia entertainment.

User comfort was also prioritized in the design of this model. It often featured an ergonomic keyboard layout and a mouse that was precise and responsive, creating a comfortable environment for extended use.

In conclusion, the Sears 486.244062 emerged as a reliable computer option during a transformative period in technology. With its robust performance, expandable hardware capabilities, and focus on user experience, it carved a niche that appealed to both professionals and casual users, leaving a lasting impact on personal computing trends of the era.