INSTRUCTIONS FOR ALL 917 MODEL TRACTORS
STEP 1: (SEE FIGURE 9)
•Assemble one angle support bracket to the topmost set of holes in the hanger brackets using two 3/8" x 1" hex bolts (D) and 3/8" nylock nuts (L). Assemble the second angle support bracket to the second from the bottom set of holes in the hanger brackets using two 3/8" x 1" hex bolts (D) and 3/8" nylock nuts (L). Be sure the brackets are turned as shown. Do not tighten yet.
3/8" x 1" HEX BOLT (D) 
3/8" NYLOCK
NUT (L)
ANGLE SUPPORT BRACKET
FIGURE 9
STEP 2: (SEE FIGURE 10)
•Assemble the pivot support bracket to the angle support brackets using four 3/8" x 1" hex bolts (D) and four 3/8" nylock nuts (L). Do not tighten yet.
•Tighten the 4 bolts fastening the angle support brackets to the hanger brackets.
•Tighten the 4 bolts fastening the pivot support bracket to the angle support brackets.
•Proceed to BLADE ASSEMBLY FOR ALL TRACTORS on page 10.
3/8" x 1" 
HEX BOLT (D)
3/8" NYLOCK
NUT (L)
PIVOT SUPPORT
BRACKET
FIGURE 10
INSTRUCTIONS FOR 247 MODEL TRACTORS
STEP 1: (SEE FIGURE 11)
•Assemble one slotted angle support bracket to the top set of holes in the quick attach brackets using two 3/8" x 1" hex bolts (D) and 3/8" nylock nuts (L). Do not tighten
•Assemble the other slotted angle support bracket to the bottom set of holes in the quick attach brackets using two /8" x 1" hex bolts (D) and 3/8" nylock nuts
(L). Do not tighten.
NOTE: Be sure brackets are turned as shown.
3/8" x 1" HEX BOLT (D)
3/8" NYLOCK NUT (L)
FIGURE 11
STEP 2: (SEE FIGURE 12)
•Assemble the pivot support bracket to the slotted angle support brackets using four 3/8" x 1" hex bolts
(D) and four 3/8" nylock nuts (L). Do not tighten yet.
•Tighten the 4 bolts fastening the slotted angle support brackets to the quick attach brackets.
•Tighten the 4 bolts fastening the pivot support bracket to the slotted angle support brackets.
3/8" x 1" |
|
HEX BOLT (D) | PIVOT SUPPORT |
| |
| 3/8" NYLOCK BRACKET |
| NUT (L) |
FIGURE 12
8