Manuals / Sears / Household Appliance / Water System

Sears 625.34844, 625.34845 owner manual Manual Advance Regeneration Check

Models: 625.34845 625.34844

1 33
Download 33 pages 34.99 Kb
Page 22
Image 22

SECTION 5

SERVICE TECH. INFORMATION

5A.TROUBLESHOOTING

MANUAL ADVANCE REGENERATION CHECK

This check verifies proper operation of the valve motor, brine tank fill, brine draw, regeneration flow rates, and other controller functions. Always make the initial checks￿ and the manual initiated diagnostics.

NOTE: The face plate display must show a steady time (not flashing).

1. Press the ON/OFF3HOLD button and hold in for 3 seconds. RECHARGE NOW begins to flash as the softener enters the fill cycle of regeneration. Remove the brinewell cover and, using a flashlight, observe fill water entering the tank.

A. If it does not enter the tank, look for an ob3 structed nozzle, venturi, fill flow plug, brine tubing, or brine valve riser pipe.

CYCLE FLOW RATES (GALLONS PER MIN.)

FILL (flow to salt storage tank)

0.1

(1.1 liters)

BRINING

 

.16

(.6 liters)

BRINE RINSE

(flow to drain)

.11 (.4 liters)

BACKWASH

1.8

(6.8 liters)

 

FAST RINSE

 

1.8

(6.8 liters)

2. After observing fill, press the ON/OFF3HOLD button to move the softener into brining. A slow flow of water to the drain will begin. Verify brine draw from the brine tank by shining a flashlight into the brinewell and observing a noticeable drop in the liquid level.

NOTE: Be sure a salt bridge is not preventing water with salt contact.

A. If the softener does not draw brine:

-nozzle and/or venturi dirty or defective.

-nozzle and venturi not seated properly on gasket.

-restricted drain (check drain fitting and hose).

-defective nozzle and venturi seal.

-other inner valve defect (rotor seal, rotor & disc, wave washer, etc.).

NOTE: If water system pressure is low, an elevated drain hose may cause back pressure, stopping brine draw.

3. Again press ON/OFF3HOLD to move the softener into backwash. Look for a fast flow of water from the drain hose.

A. An obstructed flow indicates a plugged top distributor, backwash flow plug, or drain hose.

4. Press ON/OFF3HOLD to move the softener into fast rinse. Again look for a fast drain flow. Allow the softener to rinse for a few minutes to flush out any brine that may remain in the resin tank from the brining cycle test.

5. To return the softener to service, press ON/OFF3HOLD.

BRINE VALVE

FLOAT SETTING

(Distance from top of resin tank, to top of resin bed.)

22

Page 21 Page 23
Page 22
Image 22
Sears 625.34844, 625.34845 owner manual Manual Advance Regeneration Check
Page 21 Page 23

625.34845, 625.34844 specifications

Sears, a name that has long been synonymous with retail and home improvement, offered a variety of products catering to the needs of the average consumer. Among its many tools, the models 625.34844 and 625.34845 stand out for their impressive features and capabilities.

The 625.34844 and 625.34845 are power tools designed for both amateur DIY enthusiasts and professional tradespeople. One of their main features is the robust motor that delivers substantial power, ensuring efficient performance across various tasks. Whether you're cutting, sanding, or drilling, these models handle tough materials like wood, metal, and plastic with ease.

Both models include a user-friendly design that prioritizes ergonomics. The comfortable grip helps reduce fatigue during prolonged use, making them suitable for extended projects. Features such as adjustable speed control allow users to tailor the tool's performance to the specific requirements of their task. This ability to customize speed can significantly enhance precision, especially in intricate jobs.

Another significant characteristic is their compatibility with a wide array of attachments and accessories. This versatility enables users to adapt the tools for different applications, maximizing their utility. From drill bits to saw blades, there's a multitude of options available, making these models indispensable in any workshop.

Safety is also a key focus in the design of the 625.34844 and 625.34845. Built-in safety features such as protective guards and safety switches help minimize the risk of accidents, providing peace of mind for users while they work.

These tools also showcase advanced technologies that enhance performance. For instance, some models might integrate advanced motor technology, which provides not only greater power but also improved energy efficiency. This is a significant consideration in today’s environmentally conscious marketplace.

The construction quality of both models reflects Sears' commitment to durability and reliability. Made from high-grade materials, they are built to withstand the rigors of heavy use over time, ensuring that users receive a return on their investment.

In summary, the Sears models 625.34844 and 625.34845 are powerful, versatile, and user-friendly tools suited for a range of applications. With robust features, focus on safety, and the ability to adapt to varying tasks, they remain a valuable addition to anyone's toolkit. Whether for home repairs or professional construction work, these models continue to embody the quality and dependability that Sears is known for.