Sears 758.144151 owner manual Operating Humidifier Controls, Fill Light, Humidity Control bit

Operating Humidifier Controls

The operating controls of your Kenmore Quiet Comfort whole house humidifier are located on the top center of the humidifier. The controls are found under the smoked control cover, located between the air cir- culating fans.

Lift the control cover by placing your finger in the round cutout and lifting. The cover will stay open. Now you can clearly see the control area. Familiarize yourself with the controls and reference the diagram of the control area for the correct naming used in this manual.

Fill Light

When the humidifier is almost out of water,

the Fill light will come on and the fans will automatically shut off.

eoO°e °°oo

e	0 MAX
MIN	•

To Operate the Controls

Humidity Control: _bi't

Adjust the amount of humidity depending on your needs. The humidifier will turn on and off as required to maintain level of humidity selected. A medium setting is rec- ommended, but there are times when low or high amount of humidity may be pre- ferred. For constant operation of humidifi- er, MAX allows for the maximum amount of humidity to be evaporated into the air con- tinuously.

IMPORTANT: Water damage may result if condensation starts to form on windows or walls. Humidity Control setting should be

lowered until condensation no longer forms.

Desired Humidity Light

When the selected humidity level is met, the fans will shut off and the green "Desired Humidity" light will illuminate.

When more humidity is called for, the fans

will turn on and theI_t will go out.

Speed Control

The unit is adjusted from "OFF" to "3" with a rotary speed control. The higher the air flow speed, the more water is evaporated and released into the air. Low speed (1) is

the quietest and is provided for conditions

T13

Manual Dryout

At the end of the humidification season or

if you do not plan to run the humidifier for

one week or more, you can override the automatic shutoff function to completely dry the humidifier cabinet out.

To do this, simply slide the float retainer located at the back of the humidifier cabi-

net to the fop position of the slot it is Iocat- ed in. This will hold the float in an upward

position and the fans will run until you turn the power oft.

NOTE: Be sure to position float retainer to the normal operating mode (lowest posi- tion in slot) for humidifier operation.

Below is a diagram of the slot the float retainer is located in at the back of the cab-

inet.

MANUAL DRYOUT

.<_ OP POSITION IS FOR

Bo'n'OM POSITION IS FOR

t_NORMAL OPERATION MODE

that may not require as high an evapora- tion rate.