Replacement and Care of Filters
WARNING: To reduce the risk of shock]
or injury from moving parts, always|
unplug humidifier before removing or/
replacing any parts. |
CAUTION: To help retard bacteria
growth and keep maximum efficiency,
the filters should be replaced at least
once per season, or more often under
hard water conditions. Use Sears rec-
ommended replacement filter 42-14911.
_,llfilters may be dnsed in clear water onl
Fakecare not to damage paper. To replace
_vaporative wicking filters in your Kenmore
Quiet Comfort Whole House humidifier, fol-
low the instructions below.
1. Unplug humidifier and proceed to clean.
Before removing the filters, we recom-
mend moving the humidifier to an area
where floor coverings are not suscepti-
bleto water damage, i.e. kitchen or bath
areas.
2. Open the pivoting lidand remove water
bottles and set aside. Grasp the fan
assembly front center and rear center.
Lift offand set aside on a clean fiatsur-
face. The fitter housings are now acces-
sible.
Pivoting Lid
3. Liftfiifer housing out of cabinet and place
where you may work on them comfort-
ably. With a soft, absorbent cloth remove
any remaining water or loose mineral
deposits nottrapped in the filter from the
humidifiercabinet.
4. To open filterhousing for easy access to
filters:
Front of Humidiifer
Spring Tabs
a. Deflect the two spring tabs on top of
filter housing. Lift top cover off of the
filter housing and set aside.
b. Remove the two filters and dispose
of properly. Clean internal parts of
humidifier per the "Cleaning of
Humidifier" section of your owner's
manual.
Fan Assembly
fumidifier
Cabinet
Filter
9