Location Instructions (continued)
NOTE: Due to release of cool, moist air from humidifier, it is best to direct air away from home thermostat and hot air regis- ters. It is best to position humidifier next to an inside wall. Hot air registers and cold air from outside walls can affect the effi- ciencies of the controls. Unit should not be placed where warm air from a hot air register blows directly on unit.
Step 2
The humidifier should be positioned with the back (cord exit side), at least 2 inches away from the wall. Air needs to enter through louvers in the rear panel in order for the humidifier to operate at peak effi-
ciency.
At Least
2" From Wall
Electrical Hook-Up
Locate nearest 120V A.C. wall socket in
the location desired, preferably on inside
wall. Plug in the electrical cord.
or shock hazard, humidifier should
be plugged into a 120V A.C. outlet.
I ARNING: To reduce the risk of fire
Do not use extension cords.
Water Fill
WARNING: To reduce the risk Of |
| |||
shock, | always | unplug | humidifier | Pivoting Lid Removed for Clarity |
before | filling, | cleaning, | or servicing. |
|
W'A]_I_ING: To reduce the risk of fire
or shock hazard, do not_pour or spill water into control or motor area. Close the control cover. If controls get wet, let them dry completely and have unit checked by authorized
service personnel before plugging in.
This humidifier is designed to be used with the two water bottles that are located
under the pivoting lid.
Op_the pivoting lid of the humidifier. Remove the water bottles, lift them straight up and out of the cabinet.
5
