Sears 831.24733.0 user manual Assembly, included, rubber malet

ASSEMBLY

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill perfor-

mance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly	requires	the	included	hex keys_t	and your	own Phillips	screwdriver (:_:]		..................,
adjustable	wrench	o__	-- _,	scissors 8	_-=_-_, and	rubber malet	(_	_.

Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number after the parentheses is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it is preattached to one of the parts to be assembled. To avoid damaging plastic parts, do not use power tools for assembly.

Extra hardware may be included, if a part is missing, call 1-888-533-1333.

M4.2 x 19mm Tek		M5 x 16mm	M4.2 x 19mm		M4 x lOmm	M8 x 15mm
Screw (26)-6		Screw (85)-2	Screw	(10)-6	Screw (84)-1
						Bolt (8)-6
©
M5 Star
Washer	(7)-2		Extension	Leg Nut	M8 x 58mm Bolt (13)-4
		MIO Flat Washer	(43)-4
		(14)-2
M8 Star
Washer	(5)-6				MIO x 60mm Bolt (1)-2
		M8.5 Washer
		(32)-4
MIO Star
Washer	(9)-6				MIO x 75mm Bolt (2)-4

1. Make sure that the power cord is unplugged.

52

Position the Base (52) and Extension Legs (45) upside-down as shown.

Attach six Base Pads (63) to the Base (52) and Extension Legs (45) with six M4.2 x 19mm Tek Screws (26).

/26

63

6