HOW TO OPERATE THE ELECTRONIC MONITOR
1.To turn on the power, press the on/reset button or simply begin pedaling. When the power is turned on, the entire display will appear for two seconds. The electronic monitor will then be ready for operation.
2.Select one of the five modes:
Scan modeÑWhen the power is turned on, the scan mode will automatically be selected. One mode arrow
will show that
the scan mode
is selected, and a flashing mode arrow
will show which mode is
currently
displayed. Note: If a different mode is selected, you can select the scan mode again by repeatedly pressing the mode button.
Speed, time, distance or calorie modeÑTo select one of these modes for continuous display, press the mode
button repeatedly. The mode
arrows will
show which
mode is selected. (Make sure
that the scan mode is not selected.)
3.To reset the display, press the on/reset button.
4.To turn off the power, simply wait for about four minutes. Note: The monitor has an
7
