ASSEMBLY'"
The CROSS WALK is shipped in the compact stowaway position. Set the CROSS WALK in a cleared area and remove all packing materials. Make sure that all parts have been removed before you dispose of the pack- Ing materials. Follow the instructions below to convert the CROSS WALK to the operating position. No tools are required.
1. Raise the Upright (10) to the vertical position. Slide the Lock Knob
1
Washer (78) onto the Lock Knob (77) and tighten the Lock Knob78 into the Upright.
77
2.Remove the paper backing from the Wrench Clip (65). Press the Wrench Clip onto the Right Roller Bracket (62) in the indicated location. Press the Allen Wrench (66) into the Wrench CSp.
Make sure that all parts are tightened securely before you use the treadmill. The use of the remaining parts will be described in other sections ol this.manual. Note: To protect the floor, a covering should be Placed under the treadmill.
5
