Sears 917.25271 owner manual Service And, Adjustments, TO REPLACE MOWER BLADE DRIVE BELT See Fig

Models: 917.25271

1 120
Download 120 pages 4.39 Kb
Page 22
Image 22
SERVICE AND

iii

SERVICE AND

illll

TO REPLACE MOWER BLADE DRIVE BELT (See Fig. 26)

The mower blade drive belt may be replaced without tools. Park the tractor on level surface. Engage parking brake.

BELT REMOVAL -

Remove mower from tractor (See "TO REMOVE MOWER" in this section of this manual).

Work belt off both mandrel pulleys and idler pulleys.

Pull belt away from mower.

BELT INSTALLATION -

Install new belt in reverse order of removal.

Make sure belt is in all pulley grooves and inside all belt guides.

Install mower in reverse order of removal instructions.

IDLER

PULLEYS

MANDREL

PULLEY

ADJUSTMENTS

ii

TO ADJUST BRAKE (See Fig. 27)

Your tractor is equipped with an adjustable brake system which is mounted on the right side of the transaxle.

If tractor requires more than six (6) feet stopping distance at high speed in highest gear, then brake must be adjusted.

Depress clutch/brake pedal and engage parking brake.

Measure distance between brake operating arm and nut "A" on brake rod.

If distance is other than 1-3/4", loosen jam nut and turn

nut "A" until distance becomes 1-3/4". Retighten jam nut against nut "A".

Road test tractor for proper stopping distance as stated above. Readjust if necessary. If stopping distance is still greater than six (6) feet in highest gear, further

maintenance is necessary. Contact your nearest au- thorized service center.

WITH PARKING BRAKE "ENGAGED"

NUT "A"

JAM

NUT

MANDREL

PULLEY

FIG. 26

OPERATING

ARM

I

DO NOT TOUCH THIS NUT. IF FURTHER

BRAKE ADJUSTMENT IS NECESSARY, CONTACT YOUR NEAREST AUTHORIZED SERVICE CENTER/DEPARTMENT

FIG. 27

22

Page 22
Image 22
Sears 917.25271 owner manual Service And, Adjustments, TO REPLACE MOWER BLADE DRIVE BELT See Fig, TO ADJUST BRAKE See Fig