www.searstractormanuals.com

seat position

E

c

1. The seat (A), may be moved forward, or back- ward, to give the most comfortable, and safe operating position. To move the seat, tip seat forward, as shown in Fig. 6. Loosen nut (B) slide seat (A) to desired position. Tighten nut

(B) securely. Make sure that seat plate weldment (C), has not twisted out of alignment, with seat spring (D).

We recommend wax i ng the tractor to protect it's beauty, just like you would wax your new car. Keep your tractor clean and waxed.

instructions before

FIG.4

operating

controls

another free manual from

G

FIG.5

4.Place battery (C) In piastic tray (B) with battery termina Is to rear af tractar as shawn.

5.Assemble battery clamp (D~ to one,of the two (2) battery bolts (E) with a 5;16 x 3.4 flat washer,

and wing nut above clamp as shown. Hook lower

 

FIG.7

 

 

end of battery bolt in slot in side of battery sup-

 

The following controls are used to operate the Trac-

port a s shown. Place c lamp across top of battery,

 

 

tor:

 

 

and secure other battery bolt to battery support

 

 

 

 

1. Clutch and brake foot pedal is located on the

and clamp with other flat washer, and wing nut.

 

 

left side foot rest. The foot pedal operates a

Tighten winq nuts securely.

 

 

combination brake and drive clutch. There are

6. Connect cable and cover (F) Fig. 5 to plus (+)

 

term ina I battery. Secure with 14 hex nut found

 

three positions of operation on the foot pedal.

 

a. The clutch is in DRIVE position when the

in plastic bag. Tighten nut securely.

 

7. Connect ground cable (G) (Fig. 5) to negative

 

pedal is all the way out

(when the foot

is

 

(--) terminal of battery. Secure with other 14 hex

 

removed from the pedal).

 

 

nut found in plastic bag. Tighten hex nut securely.

 

b. The clutch is in NEUTRAL

when the pedal

is

 

 

depressed half way or more.

 

 

 

c. The BRAKE is on when the pedal is de-

4824R·7.J,; 74

- 5 -

pressed all the way forward.