Checklis T, ASSEt!f BLE GAUGE WHEELS TO MOWER DECt See Fig

The gauge wheels are designed to keep the mower deck in proper position when operating mower. Be sure they are

properly adjusted to ensure optimum mower performance.

•Adjust mower to desired cutting height (See "TO AD- JU?T MOWER CUTTING HEIGHT" in the Operation section of this manual)

With mower in desired height of cut position, gauge wl _eels should be assembled so they are slightly off the

grc,L_nd.Install gauge wheel In appropriate hole with sh.:_ulder bolt, 3/8 washer, and 3/8-16 Iocknut and tighten securely

Repeat for opposite side installing gauge wheel in sanl_ adjustment hole.

GAUGE

WHEEL

MOl

BRACKET

FIG. 6

,/CHECKLIS T

BEFORE YOU OPERATE AND ENJOY YOUR NEW TRACTOR, WE WISH TO ASSURE THAT YOU RECEIVE THE BEST PERFORMANCE AND SA TISFAC TION FROM THIS QUALITY PRODUCT

PLEASE REVIEW THE FOLLOWING CWECKLIST ,/ All assembly instructions have been completed ,/ No remaining loose parts in carton

_" Batteryis properly prepared and charged. (Minimum 1 hour at 6 amps).

¢" Seat is adjusted comfortably and tightened securely

•/ All tires are properly inflated. (Fol shipping purposes, the tires were overinflated at the factory)

,/ Be sure mower deck is properly leveled side-to-side/ front-to-rear for best cutting results (Tires must be properly inflated for leveling).

v' Check mower and drive belts. Be sure they are routed properly around pulleys and inside all belt keepers,

¢Checkwiring See that all connections are still secure and wires are properly clamped,

WHILE LEARNING HOW TO USE YOUR TRACTOR, PAY EXTRA A TTENTION TO THE FOLLOWING IMPORTANT ITEMS:

,/ Engine oi! is at proper level.

,/ Fuel tank is filled with fresh, clean, regular unleaded gasoline.

,/ Become familiar with all controls - their location and function. Operate them before you start the engine.

,/ Be sure brake system is in safe operating condition.