Sears 919.16225 owner manual Specification Chart, Tools Needed, For Assembly

CongratulationsyourpurchaseofaSears Crattsman

Power Washer! It isdurable and versatile ana willserve you for years to come. Your Power washer combines air pressurewith water, detergent or degreaser to clean and degrease, it can also be used for spraying lawn, garden, trees or bushes, It has a unique nozzle that allows you to change from a direct, forceful blast to a light, foliage mist with a push or a pull.

A bleeder type connector has been supplied so that the power washer can be used with compressors that do not have a pressure relief valve or a pressure switch.

Your PowerWasher is designed-to spray in the follow- ing modes:

Air only

•Water only

•Water & air only

,_ AJr & chemicals together

It is not designed to mix water & chemicals internally. Chemfcals should be diluted with water before enter-

ing the gun to achieve precise control of chemicals,

SPECIFICATION CHART

Your Power Washer is intended for use with a _,. Horsepower or larger tanl<-lype or tankless air compressors delivering at least 2.2 SCFM at 50 PSIG. The larger the air compressor used the more powerful your washer will be.

Minimum Air Pressure;

Maximum Air Pressure:

Minimum Water Pressure:

Maximum Water Pressure; Maximum Water Temperature: Maximum Chemical Draw Height: (maximum distancewasher can be above the chemical container.)

40psig

17,5 psig

20 psJg

1O0 psig.

1406F

10feet

Optimum Chemical Flow Rate in the Air/ Chemical Mode, with the air pressure salting between 75 and 125 PSIG:

Approx, 10 oz, per minute with _ two foot draw height Appmx. 7 oz. per minute with a five foot draw height NOTE: Chemicals should have a viscosity(consistency

or thickness) similiar to water-dilute as n_cessary.

TOOLS NEEDED	FOR ASSEMBLY
2 Wrenches: a _/J" open end wrench for the Bleeder/	All other parts on the power washer are tighteneO by
Non-bleeder connector and an adjustable wrench for	hand,
the air hose,