WARNING: Perform the following steps after each use:
SAllow the engine to cool, and secure
the unit before storing or transporting.
SStore chain saw and fuel in a well ventilated area where fuel vapors cannot reach sparks or open flames
from water heaters, electric motors or switches, furnaces, etc.
SStore chain saw with all guards in place and position chain saw so that any sharp object cannot accidentally cause injury.
SStore chain saw well out of the reach of children.
SEASONAL STORAGE
Prepare your unit for storage at the end of the season or if it will not be used for 30 days or more.
If your chain saw is to be stored for a period of time:
SClean saw thoroughly before storage. S Store in a clean dry area.
S Lightly oil external metal surfaces and guide bar.
S Oil the chain and wrap it in heavy pa- per or cloth.
FUEL SYSTEM
Under FUELING ENGINE in the OPERA- TION section of this manual, see mes- sage labeled IMPORTANT regarding the use of gasohol in your chain saw.
Fuel stabilizer is an acceptable alter- native in minimizing the formation of fuel gum deposits during storage. Add stabilizer to the gasoline in the fuel tank or fuel storage container. Follow the mix instructions found on stabilizer containers. Run engine at least 5 min- utes after adding stabilizer. Craftsman 40:1,
ENGINE
SRemove spark plug and pour 1 tea- spoon of 40:1,
10 times to distribute oil.
SReplace spark plug with new one of
recommended type and heat range.
SClean air filter.
SCheck entire unit for loose screws, nuts, and bolts. Replace any dam-
aged, broken, or worn parts.
SAt the beginning of the next season, use only fresh fuel having the proper gasoline to oil ratio.
OTHER
SDo not store gasoline from one sea- son to another.
SReplace your gasoline can if it starts to rust.
19