![](/images/new-backgrounds/1058793/5879327x1.webp)
Always follow all safety precautions when cleaning and servicing the
WARNING
Electrical Shock Or Personal injury Hazard
Disconnect electrical supply before servicing or cleaning the unit.
Failure to do so could result in elec- trical shock or personal injury from cleaner suddenly starting_
1.Remove light cover by pressing
in and lifting both sides as shown.
Push In | 2. Push | in and turn | |
And Turn | bulb | counterclock- | |
| wise | to | remove, |
3. Replace the bulb Bulb must not be
higher than I5 Watts° Close light cover until it snaps in place°
NOTE: See PARTS AND FEATURES for Bulb #.
Disconnect cleaner from electrical outlet. Check and remove hair, string and lint build- up frequently in the
MATE TM from wand and follow the steps below_ Instructions can atso be found under
the light cover.
TO REMOVE BELT:
._ | cover and | light |
1. Remove | light | |
| bulb as shown | |
| under LIGHT | |
'_ | CHANGING. | |
BULB |
| |
_._ | 2. Unscrew | the |
POWER- MATE TM cover screws.
3.Turn
POWER- MATE TM over. To remove cover, insert screwdriver at cover tabs on both sides and twist to release tabs
4. Turn POWER- MATE TM right
side up. Press handle release
pedal and lower the swivel° Tilt
Quick cover forward
Release from back until
front snaps free.
14