Sears 919.329110 Carton Contents, Tools Needed For Assembly, Remove Generator From Carton

ASSEMBLY

CARTON CONTENTS 1 - Parts Bag

1 - Generator1 - Handle

1 - Parts Box

1 - Owner's Manual	*1 - Twistlock	1 - Bottle of oil
	Plug L14-30P

* To be installed and/or used in

accordance with appropriate local electrical codes and regulations. Refer to enclosed instructions for proper installation.

2 - Wheels 1 - Foot Bracket

1 - Isolator Foot	4 - 5/16-18 x 3/4 "	7 - 5/16-18
	Cap Screws	Lock Nuts

2 - Bracket

2 - 5/16-18 x 1 3/4 "	2 - Washers	2 - 3/8-16
Cap Screws		Lock Nuts

2 - Shoulder	2 - Handle Caps
Bolts

Read owner’s manual. Do not attempt to operate equipment until you have read Owner’s Manual for Safety, Assembly, Operation, Maintenance, Storage Instructions.

TOOLS NEEDED FOR ASSEMBLY

1- Box Cutter or Knife

2 - 9/16 " Wrenches

2 - 1/2" Wrenches

1 - 1" thick x 1' square piece of wood

REMOVE GENERATOR FROM CARTON

•Open carton from top.

•Cut carton along dotted lines.

•Remove all carton inserts.

•Remove generator through opening in carton.

•Using a 9/16 inch socket remove shipping block from under the generator head. Unscrew the bolt and remove the wood block. NOTE: It is very important that this is removed before starting your generator.

IMPORTANT: Before any attempt to start your genera- tor be sure to check engine oil (See Adding Engine Oil paragraph in the Operation section on page 13 of this manual.)

9 — ENG D20508