Getting to Know Your Range
Parts of the Cooktop
BACKGUARD: Model ER30G comes standard with a six inch backguard installed. Model ER30GI comes standard with a low profile (1 3/4” inch) backguard. The backguard protects the wall from the effects of heat and splattering grease. Optional kits are avail- able to change the size of the backguard for both models. See the Accessories section.
SPILL TRAY: The spill tray catches any food that falls through the cooktop grates.
GRATES: The porcelain coated cast iron grates sup- port the cooking utensils during cooking. They are removable to allow the area below and around the burners to be cleaned easily.
BURNERS: See below for the size and location of the different burners. The range generates a spark to light the burner when you turn the knob to the HIGH position.
BURNER CONTROL KNOBS: Use the knobs to turn on the burners and adjust the flame size. The corre- sponding knob illuminates when a burner is on. The center knob operates the oven.
Grate
Spill tray
Trim ring
Burner control knob
Model ER30G
Shown
Backguard
Burner
TRIM RINGS: Located behind each knob, they pre- vent liquids from getting into the internal parts.
Model ER30G (freestanding model) is equipped with full size stainless steel side panels. Model ER30GI is equipped with three inch deep side panels. It is designed for installation in a recessed cabinet or island.
Burner Locations and Features
A.1300 to 9500 BTU standard burner
B.1700 to 15000 BTU standard burner
C.800 to 18000 BTU dual burner
Special Cooktop Features
Smart Flame™: Smart Flame technology reduces the temperature under the fingers of the porcelain- coated cast iron grates.
SimmerSear™: The dual burner is equipped with Dacor’s exclusive precision burner control system. It allows you to cook with a wide range of heat set- tings, from simmer to sear.
4