24
THE INFORMATION MODE
The console features an information mode that keeps
track of treadmill information and allows you to person-
alize console settings.
To select the information mode, hold down the Stop
button while inserting the key into the console and then
release the Stop button. When the information mode is
selected, the following information will be shown:
The time display will show the total number of hours
the treadmill has been used.
The distance display will show the total number of
miles (or kilometers) that the walking belt has moved.
The lower display will show the status of an iFit Live
module. If an iFit Live module is connected, the display
will show the words WIFI MODULE. If a USB module
is connected, the display will show the words USB/SD
MODULE. If no module is connected, the display will
show the words NO IFIT MODULE.
While the information mode is selected, the matrix
will display several optional screens. Press the
decrease button next to the Enter button to select
each of the following screens:
1. UNITS: To change the unit of measurement, press
the Enter button. To view distance in miles, select
ENGLISH. To view distance in kilometers, select
METRIC.
2. DEMO: The console features a display demo
mode, designed to be used if the treadmill is dis-
played in a store. While the demo mode is turned
on, the console will function normally when you
plug in the power cord, press the power switch
into the reset position, and insert the key into the
console. However, when you remove the key, the
displays will remain lit, although the buttons will not
function. If the demo mode is turned on, the word
ON will appear in the matrix. To turn on or turn off
the demo mode, press the Enter button.
3. CONTRAST LVL: Press the Incline increase and
decrease buttons to adjust the contrast level of the
display.
If a module is connected, you may also select the
following screen:
4. TRAINER VOICE: To turn on or turn off the voice
of the personal trainer, press the Enter button.
If an iFit Live module is connected, you may also
select the following screens:
5. DEFAULT MENU: The default menu will appear
when you insert the key into the console or when
you press the Home button. Press the Enter button
repeatedly to select the manual main screen or the
iFit Live screen as the default menu.
6. CHECK WIFI STATUS: Press the Enter button to
check the status of your iFit Live module. The lower
display will show the software version number, the
network SSID, the network encryption type, the
connection status, the wireless signal strength, the
IP address of the module, the number of registered
users and their names, the results of the DNS
lookup, and the status of the iFit Live server.
7. SEND/RECEIVE DATA: To send and receive work-
outs, workout logs, and updates, press the Enter
button. When the process is finished, the words
TRANSFERS DONE will appear in the display.
To exit the information mode, remove the key from the
console.