SPECIAL FUNCTIONS

KWIKSET Presets

Press the KWIKSET button to display the DAY or NITE preset or to return to the standard display mode. Pressing the KWIKSET button to either the DAY or NITE preset causes the set point, FAN and COOL settings to assume the values stored in memory. Settings for set point, FAN, and COOL modes are displayed for each preset. The

coobr witl then operate with the displayed preset settings until the user _eaves the KWiKSET mode or enters a

different preset.

ChangelSave a Preset: Press the KW_KSET button until the desired preset is displayed. To initiate the edit mode, press either COOL, FAN, Up or Down buttons. The edit mode is activated when the DAY or NITE icon is flashing on the display. Chose the new operating mode (COOL or VENT), the new set point, and the new FAN mode (AUTO, HIGH, LOW) with the appropriate buttons. To save the new settings, press the KWIKSET button. The N_TE or DAY icon will stop flashing indicating that the new operating modes have been stored in memory.

Save a Preset With Delayed Stop Timer: Press KWIKSET until the desired preset is displayed. Enter the editing mode (press either FAN, COOL, Up or Down bu_ons). The NITE (or DAY) icon should be flashing. Activate the delay timer by pressing T}MER. Set the desired de_ay using the '%"or "o" HOURS buttons. Make any other changes to COOL, FAN, or set point as desired. Save the changes by pressing the KWIKSET button. The stop delay is now part of the preset. To remove the stop delay from the preset, enter the editing mode, press the TIMER button to turn off the timer, and save the changes.

Save a Preset With Delayed Start Timer: Press KWIKSET untit the desired preset is displayed. Enter the editing mode and make desired changes to set point, FAN, and COOL modes (the NITE or DAY icon will be flashing). Next, press the ON/OFF button. The control will automatically set the system OFF and start delay timer when the edit mode is active. Adjust the sta_ delay time using the "+" and "-"HOURS buttons. Change any of the operating modes (COOL, FAN, and set point) as desired. Press the KWIKSET button to save the preset with start delay. To remove the start delay from the preset, Press KWIKSET until the desired preset is displayed, initiate editing, and press either the ON/OFF or the TIMER button. The control wiii automatica{ly be set to ON. Press the KW _KSET button to save the preset without the start delay.

Advanced De_ay Timer

If a preset is saved with a delayed stop, it is possible to set a delayed start for this preset (this feature only works for presets with delayed stop). Press the K\^,qKSET button until the desired preset (with stop delay) is displayed. Press the ON!OFF button to turn the system OFF. Press the TIMER button to activate the stad de_ay and use the %" and %'°HOURS buttons to adiust the sta_ delay, The start deiay will count down until the preset is activated and then the stop delay will count down until the system is turned OFF. Changes t:o the operating modes made while the advanced start delay is active will not affect the preset, but will be temporarily saved and will be displayed when

the system is turned ON after the preset is finished running.

Change Scale

To change the temperature scale, press COOL to view set point. Press and hold the SET TEMP up and down buttons and release when the displayed temperature changes from °F to °C or vise versa. The new temperature scale will remain active until an ERASE

command is issued. Scale change can only occur in the COOL mode.

Erase Function

The ERASE function will restore all settings to the

factory default values. First, turn the system ON and hold the ON!OFF button down until ERASE is

complete. Wait for 1 second, and then hold the SET TEMP up and down buttons down. After about 3 seconds, the number "0.9" will be displayed and will begin to count down, to "0.0". When the set point of

72.5°F is displayed, the ERASE funct on s complete. Program D_fferential Value

The differential value is the difference between the turn

off temp and the turn on temp. To change the differential, press and hold the ROOM TEMP and SET TEMP down buttons until the display changes to the program display. Press the SET TEMP up button to increase the differential and the down bu_on to decrease the differential. Press the ROOM TEMP button to save the new differential. The new differentiai will remain active until the ERASE function is executed.

Reset

To pedorm a control reset, press and held the timer buttons (T_MER and both HOURS buttons) until the display goes blank. Re,ease the buttons and the display wil! return to normal NOTE: if the operating mode was changed or if a delay timer was set after the last power up or power failure, the changes will not be recalled. Only the last saved data will be restored. KWIKSET presets and differentia[ settings will remain intact, in the event of power failure, delay timer se_ings will be maintained for a minimum of 8 hours and up to 15 hours. At the end of the 15 hours, the timers will no longer be updated. Any remaining time left in the delay will continue after power is restored.

Page 7 Page 9
Page 8
Image 8
Sears PD4231, PH 4801, PD6231, PH 6801, PD6801, PH4231, PH6231, PD4801 warranty Special Functions, Reset
Page 7 Page 9

PD4801, PD6231, PH 4801, PH6231, PH4231 specifications

Sears has long been a name synonymous with quality tools and innovative technology. Among its notable products are the Sears PH 6801, PD4231, PD6801, PH4231, and PH6231, each designed to cater to a variety of mechanical and engineering needs. These tools embody the brand's commitment to precision, durability, and user-friendly functionality.

The Sears PH 6801 is a high-performance drill that stands out for its ergonomic design and powerful motor. With a robust build, it offers a reliable grip that minimizes hand fatigue during extended use. The tool boasts an adjustable speed setting, enabling users to tailor drilling speeds to the material, ensuring clean and efficient results.

Next in line is the PD4231, known for its versatility and efficiency. This device integrates advanced technology, including a dual-speed feature that provides enhanced control while drilling through different materials, ranging from soft woods to tough metals. The easy-to-read LED display keeps users informed about the battery life and speed settings, ultimately improving work efficiency.

The PD6801 takes performance to the next level with its integrated smart engine technology. This feature optimizes power consumption while maintaining high torque, making it ideal for heavy-duty applications. Additionally, its compact design allows for access to tight spaces, ensuring maximum usability in a variety of projects.

Meanwhile, the PH4231 offers users advanced safety features combined with impressive functionality. It includes an automatic shut-off mechanism that engages if the tool overheats, preventing potential accidents. Its lightweight construction further enhances its usability, making it suitable for both novice and experienced craftsmen alike.

Finally, the PH6231 is designed for those who appreciate cutting-edge technology at their fingertips. This tool features wireless connectivity, enabling users to connect with mobile devices for real-time updates and remote settings adjustments. Incorporating smart sensors, it automatically adjusts power settings based on the load, maximizing performance while preserving battery life.

In summary, the Sears PH 6801, PD4231, PD6801, PH4231, and PH6231 come packed with dynamic features and advanced technologies. Each tool caters to distinct user needs, from ergonomic designs and smart technology to user-friendly interfaces and safety mechanisms, affirming Sears’ reputation as a leader in high-performance tools. Whether for professional use or tackling DIY projects, these tools provide the versatility, power, and reliability required to accomplish tasks efficiently.
Top Page Image Contents