Sears PLDED3273A-B user manual Tips, Problems, Solutions

	Problems			Solutions
SWITCHING			A	Different channels and inputs will sometimes have this effect because the
CHANNEL			OR	channel signal’s own volume is already loud. There is no way remove this
SOURCE				completely.		The TV has an AUTO VOLUME LEVEL function that can
CHANGES		THE		combat this type of effect. Please make sure that function is turned on.
VOLUME
THERE			IS	When your TV’s resolution is higher than the digital channel’s broadcast
NOISE			OR	resolution, the signal is up-converted to match your TV’s resolution.
TRASH PIXELS				Up-converting can cause this type of effect.
ON		THE
SCREEN
TIPS FOR HIGH				The TV is an ideal platform for viewing High Definition Content. The
DEFINITION				best image quality can be achieved by HDMI, YPbPr (Component), then
USERS				VGA.	However, due to variances in broadcast practices, it is possible
				some image distortions can occur.
TIPS		FOR		Letterboxed (Widescreen) versions of DVD movies are most commonly
LETTERBOX				formatted for standard 4:3 TVs. The TV has the capability of expanding
CONTENT				this content so the entire screen is filled at the expense of the image
USERS				proportion.		To use this function press the aspect button on the remote
				control and cycle among the available options.
I CANNOT FIND				The buttons are represented by the ▲▼◄► buttons located on the remote
THE	VOLUME			control.	▲▼ changes the channels and ◄► changes the volume.
AND CHANNEL
CHANGING
BUTTONS
TV TURNS		OFF		The TV features a power saving mode which will automatically turn off the
AUTOMATICAL				TV, if there’s no signal provided for more than 5 minutes.
LY	AFTER		5
MINUTES
MY			TV	Check to see if you are under POWER SAVING mode for your picture
PICTURE			IS	mode.	Keep pressing the PICTURE button on the remote control to cycle
VERY DIM				out of POWER SAVING.

30