Sears Z42PQ20-U External Equipment Setup, HD Receiver Setup, Component Connection, How to connect

Z42PQ20-U 9/21/09 2:51 PM Page 15

EXTERNAL EQUIPMENT SETUP

■To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment.

■Image shown may differ from your TV.

HD RECEIVER SETUP

This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive digital signals from a digital set-top box or other digital external device, refer to the figure as shown below.

Component Connection

1. How to connect		COMPONENT IN
		VIDEO	AUDIO
				2
1	Connect the video outputs (Y, PB, PR) of the digital set-	USB	L	R
	top box to the COMPONENT IN VIDEO 1 or 2
				1
	jacks on the TV. Match the jack colors (Y = green, PB =	SERVICEONLY		AVIN
	blue, and PR = red).
		VIDEO	(MONO) AUDIO
2	Connect the audio output of the digital set-top box to
	the COMPONENT IN AUDIO 1 or 2 jacks on the
	TV.	1	2

2.How to use

■Turn on the digital set-top box.

(Refer to the owner’s manual for the digital set-top box. operation)
■ Select the Component1 or 2 input source on the TV				Y	PBPR	L	R
using the INPUT button on the remote control.
Supported Resolutions
			Y, CB/PB, CR/PR
Signal	Component	HDMI
			Resolution	Horizontal		Vertical
	Yes	No		Frequency(KHz)		Frequency(Hz)
480i
480p	Yes	Yes			15.73	59.94
			720x480i
					15.73	60.00
720p	Yes	Yes
1080i	Yes	Yes	720x480p		31.47	59.94
					31.50	60.00
1080p	Yes	Yes
					44.96	59.94
			1280x720p
					45.00	60.00
			1920x1080i		33.72	59.94
					33.75	60.00
					27.00	24.00
			1920x1080p		33.75	30.00
					67.43	59.94
					67.50	60.00

EXTERNAL EQUIPMENT SETUP

15