STAND INSTRUCTION
■Image shown may differ from your TV.
Installation
1Carefully place the TV screen side down on a cushioned surface to protect the screen from
damage.
Detachment
1Carefully place the TV screen side down on a cushioned surface to protect the screen from
damage.
PREPARATION
2Assemble the TV as shown.
2Loose the screws from the TV.
3 | Install the 4 screws securely using the holes in |
the back of the TV.
3 Detach the stand from the TV.
!NOTE
FRONT
GWhen assembling the stand, make sure to distinguish and assemble the front and rear side of the stand correctly.
G When assembling the desk type stand, check whether the screw is fully tightened. (If not tightened fully, the product can tilt forward after the product installation). If you tighten the screw with excessive force, the screw can deviate from abrasion of the tightening part of the screw.
Protection Cover
After removing the stand, install the included protection cover over the hole for the stand.
Press the PROTECTION COVER into the TV until you hear it click.
9
