![ENFORCER®](/images/new-backgrounds/53745/537451x1.webp)
ENFORCER®
SA-025 Timer Module
The
●Timer can be set from 1 sec. to 60 minutes
●Can be triggered by positive voltage (+DC), or closure or opening of dry contact.
●Relay can be programmed to activate at the start or at the end of the timing cycle
●Relay can also be set to activate for one second at the end of the timing cycle
●Programmable for pulse (flash) activation
●
●12VDC/24VDC operation (auto sensing)
●Current draw - 3mA (standby) or 40mA (relay energized)
●Board measures 2 7/8" x 2 1/2" (73 x 63 mm)●Functions programmed via DIP switches - no jumpers to cut
DIP switch settingsSwitchFunction | ON | OFF | |
#1 | Timing starts: | At end of trigger | At start of trigger |
|
|
| |
#2 How does the timing start? | When the module is powered up | Connecting (+) to TRG | |
|
|
|
|
#3 | Timer setting: | In seconds | In minutes |
|
|
| |
#4 Steady relay output, or pulse/flash? | Steady relay output | Pulse/flash output | |
#5 When does the relay output start? | At end of timing period | At start of timing period | |
|
|
| |
#6 Relay output mode, delayed or instant? | Instant output | Delayed output |
Other Products Available from SECO-LARM
Power Supply/Chargers
ST-1206-1.5A ST-2406-2A ST-2406-3A ST-2406-5A
Model # | Voltage | Current | Current | |
DC | (continuous) | (peak) | ||
| ||||
|
|
|
| |
6,12 | 1.5A | 2.0A | ||
|
|
|
| |
6,12,24 | 1.5A | 2.0A | ||
|
|
|
| |
6,12,24 | 2.5A | 3.0A | ||
6,12,24 | 4.0A | 5.0A | ||
|
|
|
|
Relay Board
SR-2224-C5
●
●LED indicates power.
●Relay can be wired for load switching, dry contact, latching, reverse polarity, line seizure, etc.
Plus many, many other products for commercial, residential and vehicle security. See our website for details, or contact us for a catalog .
The
For more information, contact: Tel: | TimerPdf070103.pmd |
Tel: