ENFORCER Outdoor
Programming Output #1
Each Output #1 user can be programmed to have a user code and a user card.*
1.1User Code Only
1.Enter Programming Mode by entering the Master Code twice.
2. Enter a user ID number. ( 0 0 0 to 9 9 9 )
3.If the left LED is red, previous user data exists. Clear it by entering . The keypad will beep in confirmation and the left LED will turn green.
4.Enter a new
5.To program the next user, repeat from step 2 in section 1.1, 1.2, or 1.3.
6.Exit Programming Mode by pressing .
1.2 User Card Only*
1. Enter Programming Mode by entering the Master Code twice.
2. Enter a user ID number. ( 0 0 0 to 9 9 9 )
3.If the left LED is red, previous user data exists. Clear it by entering . The keypad will beep in confirmation and the left LED will turn green.
4.Swipe a new user card.
5.Return to Programming Mode by pressing .
6.To program the next user, repeat from step 2 in section 1.1, 1.2, or 1.3.
7.Exit Programming Mode by pressing again.
1.3 User Card and Code*
1. Enter Programming Mode by entering the Master Code twice.
2. Enter a user ID number. ( 0 0 0 to 9 9 9 )
3.If the left LED is red, previous user data exists. Clear it by entering . The keypad will beep in confirmation and the left LED will turn green.
4.Swipe a new user card.
5.Enter a new
6.To program the next user, repeat from step 2 in section 1.1, 1.2, or 1.3.
7.Exit Programming Mode by pressing .
3 |