SECO-LARM USA SR-2224-C5 specifications Enforcer, Relay Module, Features, Specifications, SA-025

Contact ratings 8A @ 120VAC/24VDC.

Relay type

Current drain

Power input

12/24VDC (auto sensing).

Form-C relay

Low

ENFORCER®

Relay Module

SR-2224-C5

Features:

•Two separate sets of Form-C dry contacts.•Perfect for a variety of general switching purposes.

•Can be connected for load switching, dry contact, latching output, reverse polarity, line seizure, and other uses.

•6/12/24 VDC operation, programmable by on-board jumpers.•Red LED indicates relay is energized.•Large terminal blocks for easy installation.

•Small size, easily fits inside alarm panel enclosures or other hidden areas.

•Foam mounting tape included.

Specifications:

Model Number:	SR-2224-C5
Relay type:	DPDT, Form-C dry contacts
Relay contact ratings:	5A @ 250VAC/30VDC
Supply Voltage:	Programmable 6/12/24VDC,
	default at 12VDC
Current draw:	70mA @ 12-24VDC
	100mA @ 6VDC
Minimum pull voltage	+/- 20% of operating voltage
Size	2.76" x 1.89" x .79"
	(70 x 48 x 20mm)
Weight	1.94 oz. (55 g)
Mounting method:	Foam tape (included)

Connection Diagram

Two separate sets of Form-C contacts

Input terminals to energize relay

6V 12V 24V

JP1 ON ON OFF

JP2 ON OFF OFF

Preset 12V

2 Jumpers to	Red LED - lights to show
program	relay is energized
input voltage
(6,12,24V)

ENFORCER®

Power SuppliesFour Models to Choose From

●Switch selectable (see chart below) DC voltage output.

●Regulated and filtered output voltage.

●Switches to backup battery automatically in case of power loss.

●Short circuit protection.

●Built-in backup battery charger.

Model #	Voltage (DC)	Current	Current (peak)
ST-1206-1.5A	6,12	1.5A	2.0A
ST-2406-2A	6,12,24	1.5A	2.0A
ST-2406-3A	6,12,24	2.5A	3.0A
ST-2406-5A	6,12,24	4.0A	5.0A

ENFORCER®

Timer ModulesSA-025

●Triggered by positive voltage (+DC), closure of dry contact, or opening of dry contact.

●Set from 1 sec. to 60 min.

●Relay programmable to activate at start or end of timing cycle.

●Relay programmable for pulse (flash) activation.

●Built-in reset function.

●Form-C relay, contacts rated 8A @ 120VAC/24VDC.

● LED indicator.

● 12/24VDC (auto sensing). ● Low current drain.

●2 7/8" x 2 1/2" (73 x 63 mm).

SECO-LARM®U.S.A., Inc.	Tel: 1-800-662-0800 (Domestic U.S. & Canada) Tel: 1-949-261-2999 (California & international)
16842 Millikan Avenue, Irvine, CA 92606	Fax: 1-949-261-7326 Email: info@seco-larm.com Website: www.seco-larm.com

RelayModuleb.p65