Installation Manual

ENFORCER®

ST-series

Power Supplies/Chargers

Features:

•Automatic recharging of back-up batteries.

•Several models to choose from.

•Programmable DC voltage output.

• Built-in battery short-circuit protection.

ST-2406-2AQ shown

•Fused output for a regulated charge.

•Automatic switch-over to the backup battery if main power is lost or cut.

•LEDs indicate power status.

•Includes foam tape and battery leads for easy installation.

•Regulated and filtered output voltage.

What it is:

SECO-LARM’s ST-series of power supplies/chargers ensure that alarm systems and access control systems always have enough power to do their job. Protected by fused output, input polarity protection diodes, and back-up battery polarity reverse protection, these power supplies/chargers can be used to maximize the security and efficiency of nearly any alarm or access control installation.

Model #

DC Voltage

Current (continuous)

Current (peak)

Current Output (maximum charge)

PCB Size

ST-1206-1.5AQ

6, 12

1.5A

2.0A

6 V = 200mA, 12 V = 400mA

27/8” x 21/4” x 1”

(73 x 57 x 25 mm)

ST-2406-2AQ

6, 12, 24

1.5A

2.0A

6 V = 180mA, 12 V = 350mA, 24 V = 700mA

27/8” x 21/2” x 13/8”

(73 x 64 x 35 mm)

ST-2406-3AQ

6, 12, 24

2.5A

3.0A

6 V = 180mA, 12 V = 350mA, 24 V = 700mA

33/8” x 27/8” x 15/16”

(81 x 73 x 33 mm)

ST-2406-5AQ

6, 12, 24

4.0A

5.0A

6 V = 180mA, 12 V = 350mA, 24 V = 700mA

33/4” x 27/8” x 19/16”

(95 x 73 x 40 mm)

ST-2406-7AQ

6, 12, 24

7.0A

7.5A

6 V = 180mA, 12 V = 350mA, 24 V = 700mA

51/2” x 51/8” x 211/64”

(140 x 130 x 55 mm)

ST-2406-10AQ

6, 12, 24

9.0A

10.0A

6 V = 180mA, 12 V = 350mA, 24 V = 700mA

51/2” x 51/8” x 211/64”

(140 x 130 x 55 mm)

Fused Output:

The ST-1206-1.5AQ comes with a 3A fuse. The ST-2406-2AQ, ST-2406-3AQ, and ST-2406-5AQ models come with a 5A fuse. The ST-2406-7AQ and ST-2406-10AQ come with a 10A fuse. Use only the correct fuses to prevent short circuits and damage to the power supplies/chargers or the alarm access control panel.

WARNING:

Connect these power supplies/chargers only to a rechargeable back-up battery. Use of a non-rechargeable back-up battery could result in damage to the power supplies/chargers or the alarm access control panel, as well as leakage or explosion of the battery.

Installation:

1.Mount the PC board in the desired location or enclosure. It must be easily accessible for future servicing.

2.DC Power Output Setting:

a. To program ST-1206-1.5AQ DC voltage output:

1.6VDC — Cut the wire loop, and connect to a 12VAC/20VA transformer.

INSULATE THE CUT WIRE LEADS so that they do not come in contact with the power supplies/chargers.

2.12VDC — Leave the wire loop uncut, and connect to a 16VAC/40VA transformer. b. To program ST-2406 Series DC voltage output:

1.Set the desired DC output voltage ( 6, 12, or 24 VDC ) of the power supply using the DIP switch. See Table 2.

2.The default voltage output setting is 12 VDC.

Note: Products with model number that ends with "Q"or have a green “Q” sticker represents RoHS compliant products.

Page 1 Page 2
Page 1
Image 1
SECO-LARM USA ST-2406-5AQ installation manual Features, ST-2406-2AQ shown, What it is, Fused Output, Installation
Page 1 Page 2

ST Series, ST-2406-7AQ, ST-2406-5AQ, ST-2406-2AQ, ST-2406-10AQ specifications

SECO-LARM USA offers a range of security products known for their reliability and innovative features, and the series of models ST-2406-7AQ, ST-2406-2AQ, ST-2406-10AQ, ST-2406-3AQ, and ST-2406-5AQ is no exception. These entry-level systems deliver a blend of advanced technology and user-friendly design, making them suitable for both residential and commercial applications.

The ST-2406 series is equipped with a variety of key features that ensure robust security and convenience. One of the standout attributes is the incorporation of a high-performance sensor that enables rapid response times and precise detection capabilities. This ensures that any unauthorized access is immediately registered and acted upon, providing peace of mind to users.

In addition to advanced sensors, these devices utilize sophisticated signal processing technology. This feature minimizes false alarms, ensuring that only genuine security breaches trigger alerts. This intelligent detection system makes the ST-2406 series particularly effective in urban environments where disturbances are more frequent.

Another key characteristic of the ST-2406 series is its versatile power supply options. Users can choose from battery-powered or hardwired configurations, allowing for effortless installation in a variety of settings. This flexibility is especially valuable in older buildings where running new wires may be challenging. The battery-operated units are designed for low power consumption, ensuring long-lasting performance with minimal maintenance.

The user interface of the ST-2406 models is designed for simplicity. Each unit typically comes with straightforward controls that allow users to customize settings easily. This user-friendliness extends to installation, with many models featuring plug-and-play capabilities.

In terms of durability, the ST-2406 series boasts weather-resistant designs, making them suitable for outdoor applications as well as indoor use. This resilience ensures reliable operation in various environmental conditions, contributing to the overall security solution's longevity.

The SECO-LARM ST-2406 series represents an excellent choice for anyone seeking an effective security solution. With features like high-performance sensors, versatile power options, intelligent detection technology, and user-friendly designs, these models set a standard for security systems. Whether for home or business, the ST-2406 series provides comprehensive protection with minimal hassle.
Top Page Image Contents