This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Pursuant to Part 15.21 of the FCC Rules, any changes or modifications to this device not expressly approved by the SEH Computertechnik GmbH may cause interference and void the FCC authorization to operate this device.
This device has been tested and found to comply with the limits for a class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against interference in a commercial environ- ment. This device generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause interference to radio communications.
Installing this device in an FCC level B product results in an FCC level A composite system (as defined in the FCC Rules and Regulations) when attached to an Ethernet (IEEE 802.3/IEEE 802.3u) or Token Ring (IEEE 802.5) network.
Hardware Installation Guide | 19 |