English

26

*Before using the water resistance 5, 10, 15 or 20 bar watch in water, be sure the crown is pushed in completely.

Do not operate the crown and button when the watch is wet or in water. If used in sea water, rinse the watch in fresh water and dry it completely.

*When taking a shower with a water resistance 5 bar watch, or taking a bath with a water resistance 10, 15 or 20 bar watch, be sure to observe the following:

Do not operate the crown and button when the watch is wet with soapy water or shampoo.

If the watch is left in warm water, a slight time loss or gain may be caused. This condition, however, will be corrected when the watch returns to normal temperature.

NOTE:

Pressure in bar is a test pressure and should not be considered as corresponding to actual diving depth since swimming movement tends to increase the pressure at a given depth. Care should also be taken on diving into water.

TEMPERATURES

Your watch works with

+60°C

stable accuracy between -10°Ca temperature range of 5° C and 35° C (41° F and

95° F).

Do not leave your watch in very l o w t e m p e r a t u r e s b e l o w – 10° C (+14° F) for a long time since the cold may cause a slight time loss or gain. However, the above conditions will be corrected when the watch returns to normal temperature.

SHOCKS & VIBRATION

Light activities will not affect your watch, but be careful not to drop your watch or hit it against

hard surfaces, as this may cause damage.

Page 26
Image 26
Seiko 5M43, 3M22, 5M42 manual Temperatures