Seiko 5J32A specifications Technical GUIDE, General Instructions

TECHNICAL GUIDE				Cal. 5J32A
	Problems	Possible causes	Methods of repair and checking	See the
				page below.
	Swinging the watch	1) The energy stored in the	1) Swing the watch until the second hand	Page 18
	while the power save	rechargeable battery has	moves at one-second intervals, and
	function is active will not	been depleted while the	activate the power save function
	activate the time relay	power save function is in	manually to check if the time relay
	function. (Swinging the	operation.	function can be activated.
	watch starts the second
	hand moving at two-
	second intervals.)
	Swinging the watch	1) There is electric leakage	1) Check for leakage of the hour and minute	Page 15
	while the power save	inside the hour and minute	coil block. Replace the part if leakage is
	function is active will not	coil block.	detected.
	activate the time relay
	function. (Swinging the
	watch will not start the
	second hand moving at
	all.)
	After the time relay	1) There is electric leakage	1) Check for leakage of the hour and minute	Page 15
	function is activated,	inside the hour and minute	coil block. Replace the part if leakage is
	the hands do not make	coil block.	detected.
	the quick movement
	smoothly, or the hands
	indicate a time that
	differs greatly from the
	correct time.
	The date numeral does	1) As the date driving wheel	1) Correct the deformation of the date	Page 9
	not appear in the center	spring is deformed, the date	driving wheel spring. Replace the date
	of the calendar frame.	driving wheel does not	driving wheel if it is deformed to the
		contact with the intermediate	extent that the correction is impossible.
		date driving wheel, thus
		making the date driving
		wheel turn irregularly.

*For the troubleshooting of such defects as conventional quartz watches have in common, refer to the

“TECHNICAL GUIDE, GENERAL INSTRUCTIONS”.

21