Moebius a Moebius F | Seiko 5J32A specification

TECHNICAL GUIDE

Cal. 5J32A

38Second rotor

39Hour and minute rotor

35 Intermediate second wheel

34 Second wheel and pinion

36 Fourth wheel and pinion

42 Minute wheel and pinion

37 Third wheel and pinion

40 Setting wheel

41Intermediate minute wheel Case back side

Main plate side

Note: Do not set the intermediate minute wheel upside down.

•Lubricating

For the lubrication of these parts, refer to the illustrations below.

Note: Be sure to observe the position, type of oil and quantity of lubrication specified in the illustration.

	Intermediate	Minute wheel	Third wheel	Fourth wheel	Hour and
		and pinion
	minute wheel		and pinion	and pinion	minute rotor

Setting wheel

Center wheel and pinion

12

Lubricating:

: Moebius A

: Moebius F

Image 12

Seiko 5J32A specifications Moebius a Moebius F

Contents

Specifications Cal. No 5J32A Power Save Function Automatic power save functionManual power save function Time Relay Function Lubricating Types of oil Oil quantity Remarks on removing the winding stem Parts Catalogue Parts Catalogue Parts Catalogue Identification of circuit block Structure of the Circuit Block How to install Setting positionII. Remarks on Disassembling and Reassembling Please insert the pivot of the day-date corrector wheel here How to remove LubricatingLubricating Moebius a Technical Guide Moebius a Moebius F See the illustration at right Activated III. Value Checking and Adjustment How to check the leakageCoil block resistance Generating coil block resistance Current consumption Checking the automatic generating system For your information Number of swings and power reserve Checking the manual power save and time relay functionsInitial voltage and guidelines of normal/defective decision IV. Troubleshooting Guide Checking procedureImportant functions characteristic of Cal J32A Problems, causes and methods of repair Technical Guide Technical GUIDE, General Instructions CAL Identification of 5J series circuit blocks 2002-4