Seiko H024 manual English

English

22

NOTES ON OPERATING THE WATCH

*1-*5 Remarks on time/calendar function:

*1 ¥ The day of the week is automatically set once the year, month and date are set.

¥When the time is set in the 24-hour display, the alarm time will also be shown in the 24-hour display.

*2 ¥ The digits,other than seconds and Ò12HÓ/Ò24HÓ, advance quickly if Button D is kept pressed.

¥When the seconds read any number between Ò30Ó and Ò59Ó and Button D is pressed, one minute is added.

¥When setting the hours in the 12-hour display, check that AM/PM is properly set. A PM indicator (ÒPÓ mark) from the afternoon is shown when the 12-hour display is selected. In the 24-hour display, there is no such indicator.

*3 ¥ The hands move clockwise by pressing Button D. They move quickly if the button is kept pressed.

¥The hands keep advancing if Button D is released. Press Button D again to stop them.

¥After the digital and analogue times are set, if you want to correct digital time to adjust second digits only, it is not necessary to adjust analogue time again

*4 If the watch is left untouched in the TIME/CALENDAR SETTING display with an item flashing, it will automatically return to the TIME/CALENDAR mode in 2 to 3 minutes.

*5 The hourly time signal will not ring while alarm is sounding.

*6 Remarks on stopwatch function:

¥The lap number counts up to Ò199Ó. After Ò199Ó, the number is displayed in two digits such as Ò00Ó for 200, Ò00Ó for 300, and so on.

¥The split number counts up to Ò199Ó. After Ò199Ó, the number is displayed in two digits such as Ò00Ó for 200, Ò00Ó for 300, and so on.

*7 Remarks on memory recall function:

¥In memory recall after measurement, the oldest measurement in memory is displayed. In memory recall during measurement, the newest measurement in memory is displayed.

*8 Remarks on timer function:

¥The digits advance quickly if Button D is kept pressed.

¥Pressing button A while the digits are flashing can reset the timer to Ò0:00,Ó and the minute digits start flashing.

¥If the watch is left untouched in the TIMER SETTING display with an item flashing, it will automatically return to the TIMER mode in 2 to 3 minutes.

*9 Remarks on alarm function:

¥The digits advance quickly if Button D is kept pressed.

¥When the time in the TIME/CALENDAR mode is set in the 24-hour display, the alarm time will also be shown in the 24-hour display.

¥When setting the hours in the 12-hour display, check that AM/PM is properly set. ÒPÓ mark appears when the alarm time is set to PM.

¥If the watch is left untouched in the ALARM SETTING display with an item flashing, it will automatically return to the ALARM mode in 2 to 3 minutes.

English

23