STOPWATCH OPERATION
B
AC
●Before using the stopwatch, be sure to reset the digits to “00.” When the stopwatch is stopped, press Button A.
When it is counting, press Button C to stop the measurement and then press Button A.
D
1 Standard measurement
DPress to show the LAP TIME, LAP TIME IN PROGRESS or SPLIT TIME display.
C | ▼ | C | ▼ | A |
START |
| STOP |
| RESET |
2 Accumulated elapsed time measurement
DPress to show the LAP TIME, LAP TIME IN PROGRESS or SPLIT TIME display.
C | ▼ | C | ▼ | C | ▼ | C | ▼ | A |
START |
| STOP | RESTART |
| STOP |
| RESET | |
*Restarting and stopping the stopwatch can be repeated by pressing Button C.
3 Lap time measurement
DPress to show the LAP TIME or LAP TIME IN PROGRESS display.
C | ▼ | A | ▼ | A | ▼ | C | ▼ | A |
START |
| LAP 1 |
| LAP 2 |
| FINISH |
| RESET |
*Lap time measurement can be repeated by pressing Button A.
Lap time
Start
Split time
*“Lap time” is the time that has elapsed from the start of one stage of an activity to that of the next stage.
“Split time” is the time that has elapsed from the start of an activity to any given stage.
●In the LAP TIME display, the previous lap time is displayed in the upper row while the accumulated elapsed time is displayed in the lower row during measurement.
●In the LAP TIME IN PROGRESS display, the previous lap time is displayed in the upper row while the current lap time measurement is displayed in the lower row during measurement.
Lap No. for the previous lap
Lap time for the previous lap
Accumulated elapsed time
Lap No. for the previous lap 
Lap time for the previous lap
Lap time in progress |
4 Split time measurement
DPress to show the SPLIT TIME display.
C | ▼ | A | ▼ | A | ▼ | C | ▼ | A |
START |
| SPLIT 1 | SPLIT 2 |
| FINISH |
| RESET | |
*Split time measurement can be repeated by pressing Button A.
5How to use the memory function
●Up to 100 lap/split time data can be stored and recalled either during or after measurement.
BPress to show the MEMORY RECALL display.
*In memory recall after measurement, the oldest measurement stored in memory is
displayed first. In memory recall during measurement, the newest one is displayed first.
▼
CWith each press, the stored data is recalled successively from the oldest to the newest.
or
AWith each press, the stored data is recalled successively from the newest to the oldest.
▼
BPress to return to the STOPWATCH display.
Lap/split No.
AC
Lap time 
Split time 
D
Flashing mark appears
while the measurement is in progress.
●If no lap time/split time measurement is made in the STOPWATCH display and no data is stored in memory, the display shown at right will appear when the display is changed over to the MEMORY RECALL.
●Even if the stopwatch is reset to “00,” stored data is not erased and can be recalled unless a new measurement is started.
●The stopwatch can measure the lap time/split times as many times as necessary, but only the first 100 data will be stored in memory.
3
