Seiko Group ELP-3500 34

1.Turn off the projector and speaker or PA system if they are on.

2.Connect the cable’s 3.5 mm stereo miniplug to the projector’s Audio Out jack.

3.Connect the RCA plug to the external amplified speaker or PA system. Insert the cable’s red plug into the R jack, and the white plug into the L jack.

18	1 • Installation

Contents

Page Page Important Information About Your ELP-3500 Remote Control Information FCC Compliance Statement For United States Users For Canadian Users Introduction 1Installation 2 Using the Projector 3 Using the Menus 4 Maintenance Troubleshooting Technical Specifications Glossary The Getting the Most Out of Your Projector Control panel Optional accessories Getting the Most Out of Your Projector About This Manual Safety Instructions Page Where to Get Help World Wide Web EPSON Internet FTP Site EPSON Download Service EPSON Fax-on-DemandService EPSON Forum on CompuServe® Energy Star Compliance Installation Unpacking the Projector Setting Up the Projector Page Page Connecting to a Computer Connecting to a PC desktop computer Connecting to a Computer Connecting to a PC laptop computer Page Connecting to a desktop Macintosh Page Connecting to a PowerBook Page Connecting to a Video Source Connecting to a Video Source Connecting to an Audio Source Connecting audio from a video source (such as a VCR) Connecting audio from a desktop or notebook computer Connecting to an External Speaker or PA System Page Page Turning the Equipment On and Off Turning the Equipment On and Off Focusing and Positioning the Screen Image Controlling the Projector Using the remote control Page Using the control panel Projector Status Indicators Using the Menus Using the Main Menus Video image main menu Using the Main Menus Changing Menu Settings Changing Menu Settings Using the SETTINGS Screens Using the Option Menus and changing a menu item setting Computer image option menu RED GREEN BLUE PICTURE Video image option menu Using Projector Setups Storing a setup (1, 2 Using Projector Setups Recalling a setup Clearing a setup Maintenance Cleaning the Lens Cleaning the Projector Case Cleaning the Air Filter Replacing the Lamp Replacing the Lamp Page Resetting the lamp timer Troubleshooting Problems with the Projector The power status light is flashing green and you cannot turn on the projector The power status light does not come on The temperature warning light is red Problems with the Projector Problems with the Image or Sound The message NO SIGNAL is displayed A black screen is displayed The image or parts of the image are blurred or not in focus Problems with the Image or Sound The colors of the image are not right There is no sound Technical Specifications Projector lamp Mechanical Electrical Environmental 100 W, 85 Supported monitor displays Monitor and VGA connector pin assignments Brightness Composite video Contrast NTSC PAL (Phase Alternation by Line) Resolution RGB S-Video SECAM (System Electronique pour Couleur Avec Memoire). A VGA Numerics 1, 2 • Index Page Page 21 Page 21