Recalling a setup

Important! Recalling a setup replaces your current projector settings with the settings that were saved in memory.

Use the Preset button on the control panel to select the memory area that contains the settings you want to recall.

Clearing a setup

When you don’t want a preset projector setup anymore, you can clear its memory area. This removes your settings from the memory area and replaces them with the projector’s default settings. To clear a preset setup, follow these steps:

1.Use the Preset button on the control panel to choose the memory area you want to clear.

2.Hold down the Preset button for approximately 15 seconds. The status light alternates between flashing and staying lit; when it remains lit, release the Preset button.

4 0

3 • Using the Menus