3-39
Section 3 Operation Panel Menu Operations
(2) Cap cleaning (CAP CLEANING)
Moves the print head carriage to the wiper position so that you can
clean the cap unit manually.
<Parameter (Execution form)>
None
(3) Wiper cleaning (WIPER CLEANING)
The wiper blade is lifted so that you can clean the wiper blade
manually.
<Parameter (Execution form)>
None
(4) Filling ink to the cap (FILL CAP)
Fills the ink into the cap and soaks the head (nozzle surface) into
the ink for 1 to 2 hours to remove the nozzle clogging.
Use this menu when the print-off cannot be fixed by cleaning
repeatedly.
<Parameter (Execution form)>
None
-Always perform the cleaning (normal) after filling cap action.
-If the print off cannot be corrected even leaving the printer
for 24 hours, contact our service centers.
#CAP CLEANING
>
#WIPER CLEANING
>
#FILL CAP
>
NOTE
Menu Operations