Senario 21105 manual Standard Care, Cleaning Your VS-MAXX Unit

77 In 1 Video Game System

CARING FOR YOUR VS-MAXX

Standard Care

•Do not disassemble any VS-MAXX external or internal components.

•Do not try to repair any VS-MAXX external or internal components.

•Always switch the power off when connecting or disconnecting the audio/video cable to your TV, video monitor, or VCR.

•Do not store your VS-MAXX in a humid place, on the floor, or in any location where it may collect dirt, dust, lint, etc.

•Do not drop, hit, throw, or abuse the VS-MAXX or any of its components.

•Be sure all cable connections are made carefully and inserted into the correct locations.

•Be sure all plugs are firmly seated in the proper sockets by holding the plugs straight when inserting them into the sockets or jacks.

•When disconnecting any plugs, carefully pull out the plug itself. Do not pull on the cord.

•Do not step on, sharply pull, or bend any wires or cables.

•Do not expose the VS-MAXX or any of its components to extreme temperatures. It may not work properly if the temperature is too hot.

•Do not expose the VS-MAXX to direct sunlight for extended periods of time.

•Do not rapidly turn the power switch on and off. This may shorten the life of the batteries and the VS-MAXX game.

Cleaning Your VS-MAXX Unit

1.Use a soft slightly damp cloth.

2.Allow the VS-MAXX to dry completely before using again.

3.Do not spill any type of liquids or solvents on the VS- MAXX or its components.

32

77-in-1 Manual.indd 32-33

33

TROUBLESHOOTING

Before requesting repair or exchange, try the following:

No picture on the screen

•Is the VS-MAXX turned on?

•Is the TV turned on?

•Is the TV on the A/V channel?

•Is the A/V cable connected properly?

•Do the batteries have enough power?

•Are the batteries properly installed?

Screen flickers or no color

•Are the TV color controls set properly?

•Are the TV channel fine adjustments set properly?

No game sound

•Is the TV volume too low or muted?

•Have any of the cables become loose or disconnected?

Picture on TV is unsteady

•Adjust the vertical or horizontal hold controls on your television until the picture becomes steady.

Fringes/static appear on TV during play

•Is the video cable connected properly?

•Do the batteries have enough power?

Picture is blinking or distorted

•Try pressing the reset button. If there is no improvement, turn power off and try again.

No power

•Check batteries and power switch.

Joystick/Buttons do not work

•Make sure the joystick is turned on.

•Make sure nothing is blocking the IR beam between the joystick and the receiver

77 In 1 Video Game System

4/26/2005 3:48:26 PM