SLS25XP
XtremePro™ 18 Gauge Medium Wire Stapler
Muffler –
Provides quiet operation
Warranty –
XP Durability
To clear jams fast
Includes
Protects work surface
Adjustable Exhaust –
Adjustable to four positions
Comfort Overmold Grip Handle –
Reduces fatigue, increases productivity
Overmold Trigger –
Reduces fatigue
NeverLube® Technology –
Requires no tool oil
Lightweight & Maneuverable –
Easy to handle in
Visible Fastener Load –
Remaining staples in magazine are easy to check
Adjustable
Drives nails to a consistent and controllable depth
Choose the right trigger system for your specific needs!
Sequential Actuation Trigger (also known as restrictive trigger or trigger fire) operates in the following a sequence - depress the safety element at the nose of tool against the work surface then pull the trigger. After each fastener is driven, release the trigger and lift the tool off the work surface before starting the sequence again. This trigger is recommended and acceptable for most applications.
Contact Actuation Trigger (also known as dual action, bounce or bottom fire) operates in the following sequence- pull the trigger first and keep the trigger pulled while moving the tool along the work surface with a bouncing motion, depressing the safety element at the nose of the tool against the work surface where the fastener is to be driven. This trigger is recommended for use by trained professionals only in high production or volume applications.
Always read the Operators Manual and Safety Instructions with all tools to ensure proper use and safety precautions. For additional information on trigger systems and how SENCO will save you time, reduce costs, and increase quality, call our
©2007 Senco Products, Inc. | www.senco.com | ® |
|