Sennheiser 1039 Attaching the receiver to clothing

Using the receiver

Attaching the receiver to clothing

You can use the belt clip E to attach the diversity receiver to clothing (e.g. belt, waistband).

The belt clip is detachable so that you can also attach the receiver with the antenna pointing downwards. To do so, withdraw the belt clip from its fixing points and attach it the other way round. The belt clip is secured so that it cannot slide out of its fixing points accidentally.

To detach the belt clip:

Lift one side of the belt clip as shown in the diagram.

Press down the belt clip at one fixing point and pull it out of the receiver housing.

Repeat for the other side.

Tourguide 1039 13

Contents

Page Contents Important safety instructions Page The Tourguide 1039 system Frequency ranges Features of the EK 1039 receiver Suitable transmitters for your Tourguide application Page Charger for your Tourguide application Product overview of the EK 1039 receiver Ch4 Putting the receiver into operation Inserting the batteries or the accupack Charging the accupack Connecting headphones Using the receiver Switching the diversity receiver on/off and adjusting the volume Deactivating the lock mode temporarily Setting the receiving channel Attaching the receiver to clothing Configuring the receiver Calling up/ending the menu Overview of the menu The buttons Working with the menu The “Setup” menu Copy The “Channels” menu The “Setup Ch 1” ... “Setup Ch 32” menu Page Cleaning and maintaining the receiver Configuring the transmitters for your Tourguide application Matching the transmitter to the receiver Configuring the mobile SK, SKM and SKP transmitters Configuring the stationary SR monitoring transmitter If a problem occurs Recommendations and tips Specifications EK 1039 receiver Page Appendix Radio frequencies Manufacturer Declarations Sennheiser electronic GmbH & Co. KG